|
Tocchi |
|
|||
|
i keep having issues with the vacuum line fatigue-ing and cracking due to the heat
so ive used - fuel line - high temp silicon hose. and this is always happening: what do you guys recommend i use? maybe just heat wrap it? |
|||
Top | |
justa6 |
|
||
|
looking at the line just have it a fair bit longer and head it straight up over the shock tower. then under the overflow bottle. so it's not going straight past the turbo
|
||
Top | |
Tocchi |
|
|||
|
the hose is fatigue-ing/baking at the wastegate port and halfway past the turbo
im thinking about using a teflon stainless braided line ... because that will handle the heat ill just get the ends to screw into the wastegate and tap the port on the turbo a tad larger to accomodate the screw part |
|||
Top | |
TURBO_GHIA |
|
|||
|
i had the same problem i just got good quality silicone 6 mm hose works a treat i got it from gcg turbos
_________________ HMMMM BOOST !!!
|
|||
Top | |
EBXR8380 |
|
|||
|
An old brake line does the job also....
_________________ As in ZOOM 126 edition |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 32 guests |