or just get a can or aerostart.....

I might just by another BBM from a wreckers and get it polished up and put new gaskets.
Whats it worth roughly to get one polished, if i do some of the prep work myself.

its alot of f**k around if you dont have the correct tools. Im sure pro's do it in a couple hours but will most probably charge you couple hundred.

im in the process of polishing the top half of a bbm i got lying around for the purpose of selling it. Will end up taking me around 10 hours so will be looking for $110 once finished

Unfortunately the 'prep' work is 80% of the job...... the first rough sand to get the casting holes out, is very time consuming. Ive tried using electric tools before, and all they do is gouge out the alloy.....

id give you a $110 for it, whens it looking at being completed?
if i was to go to a wreckers what tools would i need to get one off, any special tools like torq bits. or just basic hex key set.

Prolly finished in a week from now i guess?

Tools you need im not sure, maybe a allen key bit on an extension with a socket wrench.... theyre normally on pretty tight

will it be all smoothed out and polished to a mirror shine? if yes ill buy it, can i see some pics of it when your finished.

Anyway. so what you were concern about doesn't really bother you at all, is that right?
more to do with a polished BBM. LOL

yeh it concerns me, ill get it check this week. a polished bbm will go nice in my engine bay, gives me a chance to replace the gaskets aswell incase theres something wrong with them.