Fordmods Logo

el abs wiring fault? 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: el abs wiring fault?
Posted: Mon Mar 03, 2008 1:19 pm 
Fordmods Newbie
Offline

Age: 51

Posts: 7

Joined: 14th Apr 2007

Ride: xw fairmont

Location: tgon
VIC, Australia

hi my el wagon has a fault with the abs the light comes on most of the time ive checked the code and checked the wiring voltages and replaced the unit my old unit then worked on another car. has any one had any problems with wiring faults ????
Top
 Profile  
 
 
Posted: Mon Mar 03, 2008 2:05 pm 
Technical Contributor
Offline
User avatar

Age: 45

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

Did you replace the pump?

Im trying to figure out how much you know about the modules.

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
 Post subject: abs
Posted: Mon Mar 03, 2008 4:28 pm 
Fordmods Newbie
Offline

Age: 51

Posts: 7

Joined: 14th Apr 2007

Ride: xw fairmont

Location: tgon
VIC, Australia

yes the module was replaced (pump with intergral computer) and when fitted to another vehicle it then worked fine. after replacing the pump i reset the codes too. but the problem was the same as before
Top
 Profile  
 
 
Posted: Mon Mar 03, 2008 5:06 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 582

Joined: 15th Jan 2008

Ride: supercharged eb

Location: Sydney
NSW, Australia

I had this problem yesterday, check all the sensors (i found my left front was melted near the extractor) and the wiring also where it plugs in the the pump

 

_________________

..My fake plant died because I forgot to pretend to water it..

Top
 Profile  
 
 
 Post subject: abs
Posted: Mon Mar 03, 2008 7:07 pm 
Fordmods Newbie
Offline

Age: 51

Posts: 7

Joined: 14th Apr 2007

Ride: xw fairmont

Location: tgon
VIC, Australia

svo_matt wrote:
I had this problem yesterday, check all the sensors (i found my left front was melted near the extractor) and the wiring also where it plugs in the the pump


the spot where it melted thru probably caused the problem at the connector, on mine every thing looks fine visually havent found any melted wires or any thing
Top
 Profile  
 
 
Posted: Mon Mar 03, 2008 9:49 pm 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

So what codes came up ??

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
 Post subject: codes
Posted: Tue Mar 04, 2008 6:28 pm 
Fordmods Newbie
Offline

Age: 51

Posts: 7

Joined: 14th Apr 2007

Ride: xw fairmont

Location: tgon
VIC, Australia

snap0964 wrote:
So what codes came up ??

it was code 63 i think
Top
 Profile  
 
 
Posted: Tue Mar 04, 2008 7:28 pm 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

from http://www.fordmods.com/forums/documents.php?doc=2 :
Valve Relay, or Valve Relay supply voltage fault

The EL's run the later Bosch 503 unit (the one pictured in the doco is an early EF one).
Plug your old unit back in - it doesn't need to be hooked up to the brake lines for testing purposes.
I'm suspecting there is a bad connection between the ABS pins and the plug sockets - the unit may be faulty, but they were pretty reliable units.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
 Post subject: abs
Posted: Wed Mar 05, 2008 10:09 am 
Fordmods Newbie
Offline

Age: 51

Posts: 7

Joined: 14th Apr 2007

Ride: xw fairmont

Location: tgon
VIC, Australia

the unit should be ok it was working when i took it out of the other vehicle, the voltages pin point tested ok when i did the change over but the abs light was off then it comes and goes thats why i suspected a wiring fault and was wondering if any one had any similar wiring problems?
Top
 Profile  
 
 
Posted: Tue Mar 18, 2008 3:27 pm 
Smokin em up
Offline
User avatar

Posts: 205

Joined: 14th Oct 2007

Gallery: 1 images

Ride: EF futura 96

Location: Le BrisVois
QLD, Australia

Where is the valve relay... i've got code 63 but cant find it in gregorys.
Top
 Profile  
 
 
 Post subject: valve
Posted: Tue Mar 18, 2008 3:43 pm 
Fordmods Newbie
Offline

Age: 51

Posts: 7

Joined: 14th Apr 2007

Ride: xw fairmont

Location: tgon
VIC, Australia

on the el its all part of the unit under the front l/h guard
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 81 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 15, 2024 11:55 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names