|
| huggiebear |
|
|||
|
i need a bit of help in what i actually need to change...
current car - NC II Fairlane Ghia - non smartlock new motor - EL XR6/NL Concord tickford motor with bbm im looking to install the lot with the bbm but im not 100 percent on what i have to change and whats optional. im picking up a radiator on friday night do i NEED to change the ECU and BCM/BEM? im looking to drop the new motor in within a month so i need to source all the parts needed. also looking for an EF/EL aircon pump, water pump, and a few other small bits. can anyone help me out? |
|||
| Top | |
|||
| Redford |
|
|||
|
nice one, its good to see you decided to install the tickford hybrid .. i guarantee you dont need to replace the ecu, the bem will still work fine without any mods but i would recomend installing a simple rpm meter to switch the crossover to the long runners@3-4k (adjustable of course)
_________________ Speed Safely! |
|||
| Top | |
|||
| huggiebear |
|
|||
|
cheers. i had a thread on AFF for 3 days and not 1 reply. atleast fordmods gives reply's... sweet so now i just need the pump belt and VRS kit. rebuilding the motor in about 2-3 weeks.
if i can find a smartlock bypass i can use the EL computer i have to run the BBM and thermos. |
|||
| Top | |
|||
| Nigel |
|
||
|
Ford Smartlock Bypass
http://cgi.ebay.com.au/Ford-smartlock-Bypass-Override-Code-generator_W0QQitemZ230233859222QQihZ013QQcategoryZ6763QQssPageNameZWDVWQQrdZ1QQcmdZViewItem These are listed regularly. There are two on ebay - this is the cheaper one. Nigel |
||
| Top | |
||
| Redford |
|
|||
|
why use the EL cpu? craig davies thermo's work well independant of ecu
_________________ Speed Safely! |
|||
| Top | |
|||
| Nigel |
|
||
|
Thermo control using the ECU is much nicer. The Davies craig thermoswitch is a VERY outdated idea and shouldnt be used!. Seriously.
their Fans are good - but not the switches. Using the ECU also means that the fans will not come on once the car is moving - and that takes load off both the electrical system and the engine. Nigel |
||
| Top | |
||
| Paulmac |
|
||
|
Huggie,
Search through BenJ's posts for his thread on El to EB full conversion. He lists everything that needs doing. Paul
_________________ What goes around, comes around. |
||
| Top | |
||
| BenJ |
|
||
|
Hey Huggie
Yes as PaulMac said, check out my thread. I have done this recently. Here is the link http://www.fordmods.com./forums/benj-s-el-engine-conversion-t61171.html It is a lot of work, but really worth the effort. PM me if you need to. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| huggiebear |
|
|||
|
sweet cheers guys... i cant wait for it. i snapped my new altinator belt today on the way home (not amused) so its going in very very soon as im stuck driving the mazda over the long weekend till i can get a belt... even a second hand one would do
|
|||
| Top | |
|||
| edfairmont4.0 |
|
|||
|
use the EL ecu dude with a smartlock bypass. and get the EL relay box and wiring to run the EL fans. Much nicer that way.
If you dodgy it with an rpm switch for the manifold switch over it will still run s**t the ignition timing is wrong for that intake and will most likely ping and or be slow.
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 83 guests |
