|
| mushy |
|
||
|
hey sorry fellas but im just wondering on where you ran the coolant feed n return lines for the turbo
i was just thinking run from before the heater tap n the return line after cheers |
||
| Top | |
||
| 104ord |
|
|||
|
what type of turbo are you running
_________________ if the bar aint bendin your just pretendin |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
T piece from heater hose to header tank...
Welded stainless steel pipe 100 mm from fitting to keep hoses away from turbine heat...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| mushy |
|
||
|
the turbo i have is a garrett t04e from snort
anyone cut the pipe that comes straight from the water pump round the back of the motor n plumbed a t piece in and then t pieced into one of the small coolant return lines to the header tank? cheers for ya help! |
||
| Top | |
||
| EBXR8380 |
|
|||
|
mushy wrote: the turbo i have is a garrett t04e from snort
anyone cut the pipe that comes straight from the water pump round the back of the motor n plumbed a t piece in and then t pieced into one of the small coolant return lines to the header tank? cheers for ya help! Yep that what we did.. But T piece before heater tap is much easier.. we TIG welded a fitting at rear of water pump for turbo.... The oil lines needs to come over rocker cover.. So there's no issue having a smaller water line...??? http://i4.photobucket.com/albums/y146/E ... oED004.jpg
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
