|
| fairmontman |
|
|||
|
I'm just about to change the waterpump on a Mate's EB. What's the trick to getting the fan off so that I actually have some space to work?
Cant get to the front of the fan coz the shroud's in the way, can't get the shroud off coz the fan's in the way.. 
_________________ Two hands and one mouth. Now that's a drinnking problem! |
|||
| Top | |
|||
| joolz |
|
|||
|
if its a viscous fan the same as the XF's you can undo it with a large spanner just behing the fan, it has to be undone clock wise.
|
|||
| Top | |
|||
| yobboford |
|
|||
|
32mm spanner or 1 1/4" will work too, b**ch of an idea, stupid engineers..........
_________________ Thanks to Crescent Motors, Liverpool. |
|||
| Top | |
|||
| Benji |
|
|||
|
Also leave the fan belts on while doing this as you need it to be tight.
Ben |
|||
| Top | |
|||
| fairmontman |
|
|||
|
Cheers Guys. Got it done saturday arvo. Damned reverse thread was what had me tricked!
_________________ Two hands and one mouth. Now that's a drinnking problem! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 44 guests |
