Howdy i need to know where people have threaded their subwoofer/amp wires through to the battery terminals, my mate was able to thread it throuugh a small hole, but in my xr8 that hole is being used for the clutch so there is no hole. so where would be the next best place to make a hole for the thick red sub/amp wire.

cheers for any input

someone with a BABF xr8 must have a sub install out there!

There are usually two to three grommets (holes) on the firewall where wires run through. I can't tell you exactly where as i have an XT but somewhere on the drivers side there has to be a hole already for the wiring loom to enter the cabin.

My advice is to just stick your head under and keep searching there is one there somewhere