|
| badkiwi |
|
|||
|
Hey all. I want to know what size is the EF stock exhaust. Cheers
|
|||
| Top | |
|||
| krisisdog |
|
|||
|
2.25" press bent.
|
|||
| Top | |
|||
| Grimketel |
|
|||
|
krisisdog wrote: 2.25" press bent.
you sure, I thought falcs had 2 inch? I know people that have "upgraded" to the 2 1/4. not much of an upgrade if its same as stock. Im 90% cetain its a 2 inch system on stock falcons.
_________________ enough isn't enough |
|||
| Top | |
|||
| alfy |
|
|||
|
More Grunt wrote: krisisdog wrote: 2.25" press bent. you sure, I thought falcs had 2 inch? I know people that have "upgraded" to the 2 1/4. not much of an upgrade if its same as stock. Im 90% cetain its a 2 inch system on stock falcons. on pre-EA i think it was 2? im 100% sure the EA exhaust was 2.25.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| krisisdog |
|
|||
|
Yes I'm sure. A 2.25" mandrel bent exhaust will give better flow than a 2.25 press bent. 2.5" mandrel gives a much better flow rate than stock and 2.25 mandrel, without loosing low down torque.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 67 guests |
