|
| boehm |
|
||
|
So here's the problem,
I ent to replace the head unit in my EF Fairmont Ghia (premium sound system), I removed the dash plate, and the torx screws have already been stripped! As this is a VERY awkward area, what is the best way to remove these? Don't really care if I destroy them, because I will be replacing them with different screws for future access. Thanks |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
easy, correct sized drill bit and a drill
|
||
| Top | |
||
| BuNtEr |
|
||
|
use a flat head Screwdriver , one that is a bit on the big side and use that to turn them.
my mate had the same problem with the ones that hold the head unit in and i used a flat head driver and a pair of multiy grips and it came undone.
_________________ BANNED |
||
| Top | |
||
| fiftyone |
|
|||
|
flat head screew driver or use a torx bit a size or two bigger and tap it in
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
| Top | |
|||
| sexyr6 |
|
|||
|
get yourself a pair of small pointy nose vise grips these get them out real easy..
_________________
|
|||
| Top | |
|||
| mr_sperm1 |
|
|||
|
FordFairmont wrote: easy, correct sized drill bit and a drill
+1 for drilling
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| old_mate |
|
|||
|
when it doubt, drill it out
_________________ too many rabbits in china |
|||
| Top | |
|||
| cooki_monsta |
|
|||
|
screw extractors, still require drilling though
_________________ Mods: sprint kit, steeda short shift, svo lip, El handles, El Air intake, au xr wheels, lukey cat back, jbl focal and pioneer sterio <--- Sold |
|||
| Top | |
|||
| Happy |
|
|||
|
keep away from drilling if you can - because you still need the thread for the replacement screw .. if you have a dremel you could fashion a flat blade slot and use that to get it out, dremel's are cool!!
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Krytox |
|
|||
|
Meh, Mole wrench or vice grips.
I've even taken them out with 'yellow' sidchrome electricians pliers. I guess u need a bulgarians strenght!
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| fiftyone |
|
|||
|
or try the less invasive method of trying to tap in and use a slightly larger one.
did they have any luck? i need confirmation on this anacdote!
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
| Top | |
|||
| boehm |
|
||
|
well, after hours of failed 'safe' attempts to remove the screws, I drilled them out.
Worked a treat. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
