|
| phatba |
|
||
|
hi all, am wondering what front seats will fit into a ba xt with minimal mods? will a set from an au work? they look a bit wider in the base to me. if switching to higher ba models, will all the elctrics work? such as xr, fairmont, or fairlane seats?
|
||
| Top | |
||
| Nicko |
|
|||
|
au wont fit easily
BA XR seats will - they are different foam and are more comfier. How much work depends on what you get - you can put seats in with side airbags if you like and just not wire them up. If you wanted to have them working that involves alot of work
_________________ Nicko |
|||
| Top | |
|||
| Lukeyson |
|
|||
|
Now where's the fun in not wiring them up?
lukeyson |
|||
| Top | |
|||
| twirqurky |
|
||
|
Lukeyson wrote: Now where's the fun in not wiring them up? We all know you would Lukey!
lukeyson You will do anything hard to a BA! |
||
| Top | |
||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
twirqurky wrote: Lukeyson wrote: Now where's the fun in not wiring them up? We all know you would Lukey!lukeyson You will do anything hard to a BA! he just falls short of fixing every ba out there 
_________________
|
|||
| Top | |
|||
| phatba |
|
||
|
ok so my best bet is to get seats from a ba/bf then? how about fairlane or fairmont seats from a ba/bf? would they be hard to wire up?
|
||
| Top | |
||
| Lukeyson |
|
|||
|
Hard but not impossible. We'll find out in the next few weeks/months.
http://www.fordmods.com/forums/ba-to-bf ... 63214.html Lukeyson |
|||
| Top | |
|||
| jlgw70 |
|
|||
|
This is another mod I did to my XT.
Replaced the entire wiring loom to a high series so I could add all the fancy stuff, so adding things like full electric seat, premium sound and dual zone a/c would be easier.
_________________ AG3NT - 2008 FG G6E Turbo / SS Growler Kit / 19 Inch Dark Argent Wheels / ASL RGB System / FPV Cluster / 60lb Injectors / F6 Piping & Intercooler / KPM 15PSI Tune |
|||
| Top | |
|||
| Lukeyson |
|
|||
|
Which looms did you use? There's quite a few different versions with various different features. Did you ever write down part numbers?
Lukeyson |
|||
| Top | |
|||
| jlgw70 |
|
|||
|
Lukeyson wrote: Which looms did you use? There's quite a few different versions with various different features. Did you ever write down part numbers?
Lukeyson Didn't write down any part number unfortunately but I know it was from a XR series BA. Darren from FTG sent all the parts needed. I originally converted my rear windows to electric but then added more pillar tweaters, rear sub, rear passenger map lights etc. The only additional loom I had to install was the dash loom for the dual zone a/c.
_________________ AG3NT - 2008 FG G6E Turbo / SS Growler Kit / 19 Inch Dark Argent Wheels / ASL RGB System / FPV Cluster / 60lb Injectors / F6 Piping & Intercooler / KPM 15PSI Tune |
|||
| Top | |
|||
| Lukeyson |
|
|||
|
Ahh. OK.
I've done the dash loom for my DZ upgrade - changed to a BF Fairlane with NAVI. But my BA XR already had Premium Audio, and I expect to be selling them off at some point. I need, however, to put in main side Looms with Side Impact sensors and power to the passenger seat in order to support the Fairlane guts. I was hoping to get a RHS loom with NAVI but I'm out of luck there. My XR Loom also has the yellow connector for the PAM on the parcel shelf, and I'm after a loom with a Blue Connector. The Park Aid modules that work with the ICC to play through the speakers are much cheaper than the stand-alone modules. When i get around to it i want to make sure I do that right too. Anyway, we've hijacked this thread. I'll list the part numbers I have in the other thread I'm working in. Lukeyson |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 74 guests |
