Does any one know whats involed to fit a rollbar from an AU into an XH?
Is it worth it?
The old steel tradesman rack is looking a bit of a on the XH Xr.
Cheers for any help.

on the 3" set i had in the back of the xf ute i had it was only 4 bolts eather side, two on the side there by the fuel tank floor and two on top of the wheel arch so by the time you drill 8 holes place bars in to back of ute and bolt them in it may be an hours job and i love the extra sporty look with the roll bars in the utes.


and personally your better off finding a set or them from an xd xe xf xg xh ute as thease sit on the floor in the back and bolt to the side i think that au on sit on top of the sides dircetaly under the taurno cover


http://www.fordmods.com/forums/download.php?id=10651

and

http://www.fordmods.com/forums/download.php?id=10649

just two photos of my ute that i had with bars

Excellent news Jonathon, the pics you've posted are the style I'm after.
Cheers.mm