|
TerroristGHIA |
|
|||
|
Have removed my door trims to fix the sticking power windows, but the buttons that lock the door no longer sit flush with the trim when the doors are locked, is there a trick to getting them to sit flush, if so, do tell
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
Top | |
joolz |
|
|||
|
pull the button off, with a pair of pointy nose pliers pull the white plastic insert out but not off. with the window open close the dorr and lock it (plastic button rod all the way down) next push the button on until it bottoms out or flush with the door. unlock door and check for correct locking operation.
|
|||
Top | |
tomcolahan |
|
|||
|
^^^^yeh do that, i did the same last time i pulled my trims off, that fixed it
_________________ We'll keep our cow s**t in the country, you keep your bull s**t in the city. |
|||
Top | |
TerroristGHIA |
|
|||
|
Thanks guys, will give it a try later tonight
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
Top | |
xr Rob |
|
|||
|
{USERNAME} wrote: Have removed my door trims to fix the sticking power windows, but the buttons that lock the door no longer sit flush with the trim when the doors are locked, is there a trick to getting them to sit flush, if so, do tell
Brett hey FPV56L what did u do to fix the sticky power windows mine have been driving me nuts cheers
_________________ If you think life is bad. Imagine being a egg...you only get laid once, you only get smashed once and the only bird that sits on your face is your mum! |
|||
Top | |
tomcolahan |
|
|||
|
mate id have a look at this thread:
{DESCRIPTION}
_________________ We'll keep our cow s**t in the country, you keep your bull s**t in the city. |
|||
Top | |
TerroristGHIA |
|
|||
|
Bent the top of the door slightly, and retightened the window where it sits in the channel, as well as graphite lube(as used on guns). works a treat so far, but its only been 2 days
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
Top | |
Who is online |
---|
Users browsing this forum: Majestic-12 [Bot] and 59 guests |