hey i know u put the power amp wire through the hole above the kick panel but where does it end up once through the hole. Also which hole does it come through in the engine bay??

Are you threading it through the rubber gromet that has an exsiting lump of cables running through it? If you are then it will come out under a metal frame plate. If you follow the bonnet opening cable from inside the engine bay, you will see it will run through a metal frame plate and then through the firewall and then connect to the lever in the cabin underneath the fuse box.

When threading the power cable through the gromet, it will pop out in the same area as the bonnet release cable.

phong =P~

ok cool cheers i was just worried where it was goin and how hard it was goin to be to retrive. so push it through the rubber grommet and i should see it near the bonnet release simple

have a look at my response in the other thread, (cbf to redo it here)

i put in some pics and descriptions of how i ran mine

http://www.fordmods.com/forums/ef-subs-t63567-20.html