|
| Tocchi |
|
|||
|
the factory radiator overflow tanks have the baffles inside them to eleviate the pressure internally.
im going to manufacture a overflow tank (in aluminium) for the EF. im just wondering if i should bother attempting to do baffle-ing inside it. also - what wall thickness should i use? - what stores should i approach for the cap fitting and the radiator hose fitting? |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
rad hose fitting you will just need some pipe the same diameter as the rad hose
the rad cap well umm no idea!
_________________ RIP SCOTT |
|||
| Top | |
|||
| knowsfords |
|
||
|
http://www.pwr.com.au/acc_expbottle.html
Pwr not only already have them but I bet if you asked nicely when ordering they'd also move their logo to the underside. They also sell various billet barbs and I think they also sell the rad cap fittings if you're that determined to do it. |
||
| Top | |
||
| twr7cx |
|
|||
|
BPT or who ever the sponser are also sell them - might be able to supply the fittings.
|
|||
| Top | |
|||
| Tocchi |
|
|||
|
im in their area today, i might pop in a see if they do have the fittings i need.
providing they are open today (being a public holiday) im thinking of making it in a cylinder shape, using thicker (than standard 1.6mm) wall aluminium piping. and welding the end plates on. almost catch can style. solely because i have a lack of room around the coolant bottle, and it would allow my intake to be modified 
|
|||
| Top | |
|||
| millard455 |
|
|||
|
prety sure pwr sell the fittings your after but with the filler neck on the overflow tank if you get it from pwr you will need to use a stant radiator cap instead of the normal one, stant cap was arround the $50 mark from memory
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 35 guests |
