|
| cboz |
|
|||
|
The injectors on my EF are due for a reco. I read a couple of days back that AU injectors have a different and superior spray pattern. Any of you have any udea if they would prove effective of my EF? and would they work properly since my car obviosly has a different ECU setup to an AU?
Thanx, Cammo |
|||
| Top | |
|||
| Froudey |
|
||
|
EA/EB/ED/EF/EL are around the 18lbs and have a single hole
AU are around 20lbs and have four pin holes. BA are ???????????? (prolly same or similiar to AU) i have au injectors in my EB and they seem to work fine
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| cboz |
|
|||
|
Did you notice any improement eg. smoother power deliverly etc.
|
|||
| Top | |
|||
| Froudey |
|
||
|
throttle seems smoother minor alleration improvement i would say use the search feature but that is as handy as tits on a bull.. (unless you are as vague and as far offtopic as f**k)
i would suggest doing it cause even in an old pos EB 3.9 it helped so can just imagine in an ef
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| TROYMAN |
|
||
|
Froudey wrote: EA/EB/ED/EF/EL are around the 18lbs and have a single hole
AU are around 20lbs and have four pin holes. BA are ???????????? (prolly same or similiar to AU) i have au injectors in my EB and they seem to work fine the ba injectors flow a lot more than the au ones.. so they might be an overkill? |
||
| Top | |
||
| green machine |
|
|||
|
ba's are 29lbs where au's are 22lbs stick with the au's unlest you are turboing
i have au's in mine and find it flows real good at top end
_________________ custom airbox,custom intake |
|||
| Top | |
|||
| NAfairlane... |
|
|||
|
Whats required to put them in or is it the same as putting in regular injectors?
_________________ Mercedes 500SEC: -- GONE -- http://www.fordmods.com/the-garage-f53/my-83-mercedes-500sec-buildup-t69837.html |
|||
| Top | |
|||
| TROYMAN |
|
||
|
straight fitt.
just put them in as per normal.. |
||
| Top | |
||
| fordfreak ef |
|
|||
|
NAfairlane... wrote: Whats required to put them in or is it the same as putting in regular injectors? clips straight into the stock ef fuel rail...
4 pin holes equals fuel mist spray as aposed to a single jet of fuel out 1 pi hole in the ef injector... (better torque au injector) ive au injectors too in my ef... |
|||
| Top | |
|||
| fairmont599 |
|
||
Posts: 1135 Joined: 27th Oct 2005 |
Do you guys run an AU rail as well? as me and a mate tried this a few weeks back when his NL was running weird and the Injector didnt fit in the NL rail, they were slightly longer.
|
||
| Top | |
||
| TROYMAN |
|
||
|
fairmont599 wrote: Do you guys run an AU rail as well? as me and a mate tried this a few weeks back when his NL was running weird and the Injector didnt fit in the NL rail, they were slightly longer.
no we all use the std rail.. im using a el manifold/fuelrail with the au injectors.. i know another member who has them in his eb and he is using the eb rail. they are the same length.. are you sure you were using au injectors?? |
||
| Top | |
||
| SgtBourne |
|
||
|
damnit, now this gives me more ideas! lol
_________________ So much RAM the motherboard twisted off the POST. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
