|
| aristopwr |
|
||
|
Is there a way to test to the temp guage to see if it is faulty on my ED i6?
My car won't go past 1/8 and I have replaced the thermostat and the temp sender unit.. Many thanks in advance |
||
| Top | |
||
| SgtBourne |
|
||
|
u could always just drive around @ say 25km in first
_________________ So much RAM the motherboard twisted off the POST. |
||
| Top | |
||
| aristopwr |
|
||
|
Ok, so I didn't write that properly.
The gauge won't move past 1/8th on the instrument cluster so is there a way to test the gauge to see if it can go all the way to the red.. |
||
| Top | |
||
| LilSammy |
|
|||
|
pull of the coolant temp sensor plug, located at the thermostat housing, this should make the guage shoot to the red
_________________
|
|||
| Top | |
|||
| 4dlvr |
|
||
|
i think what you really want is for the car to operate in its optimum temperature.
you can do this by testing there thermostat, or if you cant be bothered, get a new one, their cheap and easy to replace. if its in the norm zone, i wouldn't be to worried
_________________ 96 EF FAIRMONT |
||
| Top | |
||
| aristopwr |
|
||
|
Thanks for the replies.
As stated in the first post-I have replaced both the thermostat and the temp sender with new ones..I will unplug the temp sender lead and see if the gauge moves to the red? When I start the car,the temp gauge moves no more than a bee's d**k and that's it.. 
|
||
| Top | |
||
| badkiwi |
|
|||
|
drain ur water lol u will c if it changers temp
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
