gday.. what is the factory cam specs for gli/futura EF... advertised duration / valve lift / lobe sep / timing

thanks in advance

If no luck here, try cresent (site sponsor)

P.S. What are you planning to go with the specs once you have them?

you will find some info here

http://www.fordmods.com/forums/viewtopi ... light=dial

thinking of getting a tighe 826 and just want to see what the differences are between it and the factory cam.

826 in 70,16 ex 23,68
dur 266 267
lift .480" .460"

your link had the timing, but only lift figures was tickfords post with lift at 12mm and 11.52 mm. As a motoring newbie I dont know how to match this up with advertised lift from cam makers.

I see that most people aim at lift over 500 but I take it that lift is not the only important aspect of cams??