|
| fairy v8 |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: mate IMHO you can do a lot better than an alphabet cam ...try the new Comp or Crane quick ramping cams designed specifically for EFI cars or better still get a custom cam taylor made for your set up just make sure you get good springs and retainers , locks etc as they get a real hiding Yes some say that.. They are still good cams though.. With good springs 1:72 rockers . They have quick enough ramps... There is no way you could use std springs with this combo !! Its not the efi that allows quick ramps.. Its the roller cam with its narrow contact which prevent lobe scuffing... na! i was meaning a cam thats designed to suit EFI vehicles as well as quick ramping to take advantage of it being a roller cam (some dont) i think the next one i do il get a custom one tailored to suit your whole package ....by one of the cam designers in the states |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Yep you can't go wrong with Ed Curtis...
http://www.flowtechinduction.com/customers.htm
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| fairy v8 |
|
||
|
he seams to have a lot of happy customers on corral!!
|
||
| Top | |
||
| EBXR8380 |
|
|||
|
{USERNAME} wrote: he seams to have a lot of happy customers on corral!!
Hahaha he often has the odd debate !! He deff says what he thinks !!! http://cammotion.com/DesktopDefault.aspx?tabid=69 is another...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| fairy v8 |
|
||
|
yep .....not one to step back from a good debate hehehe
|
||
| Top | |
||
| BOTTLEDUP |
|
|||
|
I'd go with the Crane 2040 (E-303) it would make some great mid range torque & HP. Jeff's ute is a prime example of what can be achieved from the right components.
_________________ TE50 T1 P01 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 21 guests |
