|
| denver |
|
||
|
Hi i have a EFxr6 manual and have had a miss fire i think @ around 3000 RPM .Its like a cross fire from a lead .I have changed the plugs about two months ago.If it is the coil pack do you need to take the inlet manifold off to get to it or can you remove it from under the car, and how much are they, or could it be somthing else! THANKS....
_________________ Nothing is impossible it just costs more |
||
| Top | |
||
| racer |
|
||
|
Check the crank angle sensor behind the harmonic balancer. Make sure the harmonic balancer is not rubbing on it.
If that's ok change the ignition leads & also make sure you use ngk spark plugs. Spark plugs that you have to screw the end on the plugs are no good don't use them. NO you don't have to take the inlet manifold off to get to the coil pack. You get them from under the car.
_________________ FORD EL 4.0L. Crow cam, T.I Performance J3 Chip, Vernier cam gear, SPR ported head, 68mm TB, AU head gasket + ARP studs, AU injectors, Pacey 4480, High flow cat, Shift kit, Stallie, 3:73 TrueTrac. |
||
| Top | |
||
| krisisdog |
|
|||
|
Change the leads, they can break down under load.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 116 guests |
