|
| xcon |
|
||
|
does any1 have any suggestions on how 2 stop boot rattle with using expanding foam mate used it in his car n boot id rippled now. so i was trying to avoid so any suggestions would b good
_________________
|
||
| Top | |
||
| Froudey |
|
||
|
dynmat or any sound proofing products
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| mr_ratapus |
|
|||
|
its caused by your sub right?
any money says you have cracked the welds. or that brown gap filler stuff is all cracking out. replace the boot. thats wat i have to do. |
|||
| Top | |
|||
| nannas_ed |
|
|||
|
{USERNAME} wrote: its caused by your sub right?
any money says you have cracked the welds. or that brown gap filler stuff is all cracking out. replace the boot. thats wat i have to do. before you go to this extreme, fill the gaps on the boot lid with clear silicone to stop it from vibrating againt the boot skin. then lay some dynamat over the top of that. i done this in my xr and it stopped the rattles.
_________________
|
|||
| Top | |
|||
| mr_ratapus |
|
|||
|
yeah you could try that i guess. my other peice of motivation for a new boot is to get rid of the gay tickford spoiler.
|
|||
| Top | |
|||
| xcon |
|
||
|
i do like the sounds of the dynmat n silicon. any know where i could get sum of that dynnmat??. yea it is cause of my sub. to bad that wasnt an el xr spoiler mate would of grabd it off u lol??
_________________
|
||
| Top | |
||
| Bsjenko |
|
|||
|
anyone got any pics of the sound deadeding in place on the boot etc.... ?
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| dave0 |
|
||
|
dynamat is sold at auto barn and on ebay pretty pricey but it will get rid of the boo rattle and make ur system sound alot better
_________________ ||EL FAIRMONT|| |
||
| Top | |
||
| nannas_ed |
|
|||
|
{USERNAME} wrote: anyone got any pics of the sound deadeding in place on the boot etc.... ?
all up, i paid $30 for the dynamat and that was enough to do the boot with a tiny bit leftover and $5 for the silicone and caulking gun. so $35 and a few hours on the weekend = no sub vibrations. also i added some single sided foam tape in between the boot and number plate
_________________
|
|||
| Top | |
|||
| OZBMX |
|
|||
|
^^^
interesting only 30 bucks, where'd you get that from and how much of it did you need? any suggestions for fitting?
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| nannas_ed |
|
|||
|
{USERNAME} wrote: ^^^ interesting only 30 bucks, where'd you get that from and how much of it did you need? gary's car radio i got two sheets so $15 each, i dont remember what size they were {USERNAME} wrote: any suggestions for fitting?
Clean the surface as best as you can with degreaser on a rag dont be shy with filling the gaps with silicone (i pumped a whole tube into the boot lid making sure to get right into all the gaps allow at least 2 days for the silicone to fully dry before applying dynamat buy a roller to get the dynamat to stick right into the corners (i bought a cheap paint sample pot roller from bunnings for a 3.50 and it work a treat) also it makes it easy to apply the dynamat by cutting it into smaller more manageable peices other than that take your time, do it once do it properly
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 9 guests |
