|
| EA90GHIA |
|
||
|
Hey Guys well it started yesterday drove up hill doing 50 km/h and usually by this time the gearbox in ECONOMY mode is already in 2nd. But 1st Revs out to 3000 RPM and then changes to 3rd Gear. 4th never comes. Does anyone know what this issue is ?? Is it anything to do with the Module on the side of the gearbox ?? Any help would be great thanks.
|
||
| Top | |
||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
ah rob, its time to join the legion of T5'd Falcons
_________________
|
|||
| Top | |
|||
| falconed2xr8 |
|
||
|
its the passenger side band needs adjusting
_________________ you know boats, i know about fords...the only thing i pay for is whiskey coz i'm too damn lazy to make it myself |
||
| Top | |
||
| xfman1986 |
|
||
|
gearbox is rooted..
|
||
| Top | |
||
| Disco Frank |
|
|||
|
could just need a flush with new filter and oil can do wonders for a box
_________________ RIP SCOTT |
|||
| Top | |
|||
| Grimketel |
|
|||
|
{USERNAME} wrote: could just need a flush with new filter and oil can do wonders for a box
flush can also kill a box, sometimes the carbon in the old fluid is all thats stops it from slipping. Ive been told by a lot of ford mechs that for higher mile autos, its good to keep some old fluid in, even to the point of half old fluid, half new fluid. a lot of btr 4 spds give up the ghost after a full flush if they are in a state of wear.
_________________ enough isn't enough |
|||
| Top | |
|||
| edfairmont4.0 |
|
|||
|
your gearbox in technical terms, is f**k.
I had this same issue 250,000km + Thrashing = f**k gearbox.
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| falconed2xr8 |
|
||
|
mine was doing same until i ajusted pasenger side band and it started to work again but i belive the clutch plates are going cos i got tcc lock in 3d
_________________ you know boats, i know about fords...the only thing i pay for is whiskey coz i'm too damn lazy to make it myself |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
