Fordmods Logo

XH distributor drive 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: XH distributor drive
Posted: Fri May 23, 2008 10:11 pm 
Getting Side Ways
Offline

Age: 44

Posts: 775

Joined: 27th Nov 2004

Ride: BA XT Series 2

Location: Cairns
QLD, Australia

Well I dont know if it is a common problem or not but this is what happened to the distributor drive shaft in my XH.
Image
Here is the new one. Can you see the difference. Dunno how it would happen not like there is heaps of weight being driven off the gear.
Image

 

_________________

Stage 1 stereo install done. Pics in audio section.
Next step is probably a nice exhaust or stage 2 stereo.

Top
 Profile  
 
 
 Post subject: Re: XH distributor drive
Posted: Fri May 23, 2008 11:28 pm 
Getting Side Ways
Offline

Posts: 6449

Joined: 11th Nov 2004

EFfalconsrule wrote:
. Dunno how it would happen not like there is heaps of weight being driven off the gear.


yes there is. it drives the oil pump.
Top
 Profile  
 
 
Posted: Sat May 24, 2008 1:53 pm 
Getting Side Ways
Offline

Age: 44

Posts: 775

Joined: 27th Nov 2004

Ride: BA XT Series 2

Location: Cairns
QLD, Australia

Even still it is not like it spins the cam or anything big.

 

_________________

Stage 1 stereo install done. Pics in audio section.
Next step is probably a nice exhaust or stage 2 stereo.

Top
 Profile  
 
 
Posted: Sat May 24, 2008 1:56 pm 
Stock as a Rock
Offline

Age: 51

Posts: 131

Joined: 1st Sep 2007

Gallery: 1 images

Ride: 2004 BA Falcon

Location: Adelaide
SA, Australia

It spins an auxilary shaft that we had one at work once that partially siezed and ending up doing the same thing.Can also be caused by driving a heavy duty oil pump.Id be checking auxilary shaft.

 

_________________

what is it with these wankers and their pod filters.....f#*ken too fast too furious crap! You do realise that big suck noise is for your engine and not your member.

Top
 Profile  
 
 
Posted: Sat May 24, 2008 2:44 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

i also recomend checking the aux shaft.. as if its damaged it will chew out the new dizzy gear..
and excessive play in the dizzy shaft can cause the gears to bind and strip like yours have..
Top
 Profile  
 
 
Posted: Sat May 24, 2008 4:16 pm 
Getting Side Ways
Offline

Age: 44

Posts: 775

Joined: 27th Nov 2004

Ride: BA XT Series 2

Location: Cairns
QLD, Australia

Ok will. On closer inspection it looks like it may have been an old fault. The gear is fully worn all over not only in one spot the aux shaft seems OK.

 

_________________

Stage 1 stereo install done. Pics in audio section.
Next step is probably a nice exhaust or stage 2 stereo.

Top
 Profile  
 
 
Posted: Sat May 24, 2008 4:42 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1056

Joined: 14th Feb 2005

Gallery: 26 images

Ride: '97 EL XR6

Location: Cairns
QLD, Australia

That actually happened to my car Cam... You'll need a new oil pump, dizzy and auxillary shaft. I got two of both shafts chewed out laying around some where because the mechanic forgot to replace the oil pump. So when I picked it up and took it for a test drive the same problem happened.

So did your tacho bounce a bit before it happened and your oil pressure sit at the top?
Top
 Profile  
 
 
Posted: Mon May 26, 2008 12:08 pm 
Getting Side Ways
Offline

Age: 44

Posts: 775

Joined: 27th Nov 2004

Ride: BA XT Series 2

Location: Cairns
QLD, Australia

OK so on an even closer inspection seems that I may need another oil pump. Bugger it. Thanks all for the advice.

Cam.

 

_________________

Stage 1 stereo install done. Pics in audio section.
Next step is probably a nice exhaust or stage 2 stereo.

Top
 Profile  
 
 
Posted: Mon May 26, 2008 1:42 pm 
Getting Side Ways
Offline
User avatar

Age: 44

Posts: 1056

Joined: 14th Feb 2005

Gallery: 26 images

Ride: '97 EL XR6

Location: Cairns
QLD, Australia

Not "may" Cam... But need. I found out that the shaft is designed to chew out to protect your engine when the pump fails. Saves you on an entire rebuild. But if you have your engine out then why not do a few more improvements. Cali has the BA ;)
Top
 Profile  
 
 
Posted: Mon May 26, 2008 1:47 pm 
Getting Side Ways
Offline

Age: 44

Posts: 775

Joined: 27th Nov 2004

Ride: BA XT Series 2

Location: Cairns
QLD, Australia

Yea cliff and I got permission to put on a body kit and a few other mods. But as far as the XH goes just trying to sell it now.

 

_________________

Stage 1 stereo install done. Pics in audio section.
Next step is probably a nice exhaust or stage 2 stereo.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 141 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 29, 2024 9:37 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names