|
| ef_ridin_low |
|
||
|
hey guys im after a cheap wade 977b cam possibly wit everythin required to install it, i currently have a stage 3 crowcam with crow valve springs, so can i just swap cams or do i need need shims and springs?
_________________ 95 evlmont fairmont, 5 speed manual, 3.45lsd, rebuilt and recond, port and polished head, wade 1521a cam,ems stinger, garret 3540 1.06 rear, tial 38mm waste gate, turbosmart "supersonic" bov, bosch greentop 42lb injectors,snort log manifold, heavy duty 5 puck ceramic clutch,fmic 600x300x76, |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
You need 12 extra shims which is 1 extra in each rocker arm. Even though the 977b is mild compared to whats out there, i would at least use XR6 spec springs as a minimum as stock 12 year old springs wouldnt cut it.
Crow do an XR6 spring, rated at .600" lift for around $120, but you already have them so your fine |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |