|
| cappa87 |
|
||
|
g'day all , i just bought a 3:45:1 LSD to replace a 3:08:1 single spinner , now just wondering before i install it i wondering besides the speedo being thrown out is there anything else i can expect to be out of order ?
|
||
| Top | |
||
| Krytox |
|
|||
|
what model diff?
may have to change hand brake cables etc.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| cappa87 |
|
||
|
came from a ef fairmont giha
|
||
| Top | |
||
| BenJ |
|
||
|
And what model car is it going into?
Some basic information would be just slightly useful. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| twase |
|
|||
|
Taking a punt from your EF dash tread I assume going into an EF. Bolts straight in, you just need to change the speedo sender gear, see here to work out which one.
http://www.fordmods.com/forums/Speedo-Calc-d30.html
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| cappa87 |
|
||
|
its going into a 95 ef falcon , the car is srock as rock
|
||
| Top | |
||
| cappa87 |
|
||
|
its going into a 95 ef falcon , the car is stock as rock
|
||
| Top | |
||
| Paulmac |
|
||
|
Do what twason suggests, pick the correct gear and get it from Ford for about $13.
It's necessary to lower the gearbox at the rear bracket to gain access to the sender gear holder, one 8mm bolt on the drivers side of the gear box. Cheers, Paul
_________________ What goes around, comes around. |
||
| Top | |
||
| BenJ |
|
||
|
Paulmac makes it sound soooooooo easy.
While the description is simple, I reckon it was the hardest/most annoying part of my whole diff swap! And, yes, you really do need to undo the tranny crossmember to get to it. Have fun. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| twase |
|
|||
|
BenJ wrote: Paulmac makes it sound soooooooo easy. I have done it twice but never thought about dropping the rear, my daughter did learn some new words though.
While the description is simple, I reckon it was the hardest/most annoying part of my whole diff swap! And, yes, you really do need to undo the tranny crossmember to get to it. Have fun. BenJ
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 1 guest |
