|
| XCH45R |
|
|||
|
Hey guys,
Just curious on what diagnostic mode is exactly, and how you do it? Thanks team! 
|
|||
| Top | |
|||
| chunkz |
|
|||
|
it should be in modifications
but yeh has different options in what you can do e.g display fuel range display rpm/speed and other stuff... but yeh check in mods
_________________
|
|||
| Top | |
|||
| XCH45R |
|
|||
|
chunkz wrote: it should be in modifications
but yeh has different options in what you can do e.g display fuel range display rpm/speed and other stuff... but yeh check in mods Oh, that is all it is? I thought it could tell you problems etc etc.. ? |
|||
| Top | |
|||
| chunkz |
|
|||
|
http://www.fordmods.com/phpBB2/documents.php?doc=12
Ford EF/EL Falcon, XR, Fairmont Instrument Cluster Diagnostic Mode This document describes the Falcon EF/EL Dash Diagnostic Information that is provided when the Dash is placed in Diagnostic mode The information that is returned is displayed using the Odometer display area, and includes the information that is transferred on the ECU bus This includes Fuel level, Fuel consumption, oil pressure, Coolant Temperature, RPM, Vehicle speed, Gear lever position, and many others but yeh would be cool if it could tell ya whats wrong
_________________
|
|||
| Top | |
|||
| EDXR8 |
|
|||
|
XCH45R wrote: Hey guys,
Just curious on what diagnostic mode is exactly, and how you do it? Thanks team! I assume you are meaning the EEC diagnostics mode, not the clusters information mode. When you put the EEC into dignostics mode it does a series of checks to find faults in the sensors which are current or which are stored in EEC memory. You also use diagnostics mode to set base timing as it stops the EEC from adding timing advance. You have to short out two pins on the diagnostics port (the port below the fuse panel (cant remeber which ones, I have a diagram around here somewhere), then you you can choose to run a numberof different tests (most of the proceedures are described in the ford repair manuals. |
|||
| Top | |
|||
| XCH45R |
|
|||
|
EDXR8 wrote: XCH45R wrote: Hey guys, Just curious on what diagnostic mode is exactly, and how you do it? Thanks team! I assume you are meaning the EEC diagnostics mode, not the clusters information mode. When you put the EEC into dignostics mode it does a series of checks to find faults in the sensors which are current or which are stored in EEC memory. You also use diagnostics mode to set base timing as it stops the EEC from adding timing advance. You have to short out two pins on the diagnostics port (the port below the fuse panel (cant remeber which ones, I have a diagram around here somewhere), then you you can choose to run a numberof different tests (most of the proceedures are described in the ford repair manuals. Yes, That is what I am after, How does it tell you the faults though? |
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
By flashing a series of codes to an LED which is connected to the disgnostic port... kinda like morse code. Then look up the relevant code on a list.
The fordmods EEC-V doco should have a write-up on this.
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| raiki |
|
|||
|
You connect a jumper to put it in diagnostic mode and an LED. You count the flashes on the LED and they are the faults.
Get the Doc. It's pretty easy to do.
_________________ Adrian
|
|||
| Top | |
|||
| XCH45R |
|
|||
|
thanks for that guys, I will give it a go
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 12 guests |
