Hi all,

I pulled the inlet and outlet adapters off my M90 eaton supercharger and noticed that there was some small greasy soot on the inside curves of the charger... mostly it wipes off easy.. and the teflon coating is fine..

there are a couple of spots where its harder to get off..

What cleaner can I use on the vanes that will not hurt the teflon coating?

ta

rgds

Frank

why do you need to clean it??? kero might be ok???

Daz

put some palmolive dish wash on it, and use hot water to rince off, do not scrub as you can flake the teflon with ttoo much presure, and you don't want to find out how much presure is too much.

Thanks DC_todd, thats what I wanted to know...

good stuff.