|
| zacha001 |
|
|||
|
Hay all.
Not really confident in installing a new set of side blinkers for my EL fairmont. Can anyone help me with a step by step guide or pics on what to do. Any help please. Zacha001
_________________ 96 Fairmont
|
|||
| Top | |
|||
| PIMP_LTD |
|
||
|
You pretty much just CAREFULLY pry the old ones out with a small flat balde screwdriver, disconnect the plug, connect the new light, and they just clip back into the panel.
But like i said, do it carefully to avoid scratching paint, etc. Andrew.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| nannas_ed |
|
|||
|
heres an easier sure fire way not to scratch the paint.
undo 3-4 of the screws that hold in the splash sheild in the wheel arch and pop it out from behind.
_________________
|
|||
| Top | |
|||
| krisisdog |
|
|||
|
After you undp the screw on top, just pull it. DONT pry it out, you'll chip paint/crack lenses.
|
|||
| Top | |
|||
| nannas_ed |
|
|||
|
zacha001 wrote: Hay all.
Not really confident in installing a new set of side blinkers for my EL fairmont. Can anyone help me with a step by step guide or pics on what to do. Any help please. Zacha001 sorry should have asked this before. do you want to replace the corner indicators next to the headlights or the side flashers on the front guards
_________________
|
|||
| Top | |
|||
| krisisdog |
|
|||
|
If its the side flashers then you do need to pry them... but very carefully.
|
|||
| Top | |
|||
| nannas_ed |
|
|||
|
krisisdog wrote: If its the side flashers then you do need to pry them... but very carefully.
no you dont just push them out carefully from behind the guard, no need for prying anything 
_________________
|
|||
| Top | |
|||
| krisisdog |
|
|||
|
nannas_ed wrote: krisisdog wrote: If its the side flashers then you do need to pry them... but very carefully. no you dont just push them out carefully from behind the guard, no need for prying anything To my knowledge unless you pull out the black plastic you cant get to the back of the guard. If its the std gli style of flasher you push them forward (i think) and give them a little help with the screwdriver. If its the rounder style I'd assume its the same - i havent pulled them off before. |
|||
| Top | |
|||
| nannas_ed |
|
|||
|
krisisdog wrote: nannas_ed wrote: krisisdog wrote: If its the side flashers then you do need to pry them... but very carefully. no you dont just push them out carefully from behind the guard, no need for prying anything To my knowledge unless you pull out the black plastic you cant get to the back of the guard. If its the std gli style of flasher you push them forward (i think) and give them a little help with the screwdriver. If its the rounder style I'd assume its the same - i havent pulled them off before. you dont have to take the splash sheilds out completly just undo 3-4 screws and that should give enough room to get your hand in behind the guard take out more screws if you have fat hands
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 57 guests |
