|
| Grumblexr6 |
|
||
|
If you have these fitted can you post some pics up please as I wanna know if I have them already on my engine or not Thanx
|
||
| Top | |
||
| Stevo |
|
|||
|
seriously, i have them fitted and apart from them beinga different colour, i rekon you would have to be fkn good to spot the difference.
(They are smaller, but there is no way i could just look at some and say yeah they look smaller them normal) Hopefully someone here could give you measurements of the standard pully's. This would be your best bet |
|||
| Top | |
|||
| Mackagtho |
|
||
|
the water pump pulley is about 6 inches dia, and the crankpulley is about 5 inches dia,
hope this helps
_________________ ED Fairmont, XR lights, AU tickford 200kw, GT-P 18's, TwEEcer, 230kw, KAAZ LSD. |
||
| Top | |
||
| mitchg911 |
|
|||
|
or the standard crank pulley is about the same diameter as the balancer, the underdrive version is far smaller...
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| Grumblexr6 |
|
||
|
Yea thanx guys ill check out the measurements now
|
||
| Top | |
||
| Grumblexr6 |
|
||
|
the water pump pulley is about 6 inches dia, and the crankpulley is about 5 inches dia,
hope this helps just measured them and yea its 6" for water pump and 5" for crank so that means I already have underdrive pulleys then hey, |
||
| Top | |
||
| XR9UTE |
|
||
|
Have a look at the 351w into XE post above and also the 5.0 into XG one.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 60 guests |
