|
| mystery |
|
||
|
xf falcon, all wired up except for the red wire (ignition)
has to connect but don't know where to connect it to. should go to wire so that when ignition is turned on the thing gets the power. thanks |
||
| Top | |
||
| outlawxr6 |
|
|||
|
The factory wiring should contain the ignition supply.....
_________________ Do it once, Do it right!!!!!! |
|||
| Top | |
|||
| mystery |
|
||
|
yeh but it has came off (person before had hooked it up to a 6 stacker and i don't know where the wire went)
so basically i need to know where to connect the wire so i get the ignition supply any help please |
||
| Top | |
||
| mr_sperm1 |
|
|||
|
ciggy lighter? anything that comes on when the key is in the ignition.
or, you can hook it to permanent power and just make sure you turn it off everytime you leave the car!
_________________ Maloo - Holden's word for ugly. |
|||
| Top | |
|||
| vrblou02 |
|
|||
|
easiest way would be to just splice into ur power wire from your cigaretter lighter
its generally the square plug wire which is pos as they have neg and pos so if ur not sure and want to be sure not to short anything just use a power tester or as quoted already aswell u could also run it to the same wire as ur yellow wire soit runs permanent but its not recommended at all where abouts in sydney are u located mate good luck Drifty
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| mystery |
|
||
|
yeh mate did a bit of reading on the net and i'll go at the ciggy lighter tomorrow. to the positive right?
im in maroubra, fair way form the mountains 
|
||
| Top | |
||
| vrblou02 |
|
|||
|
yea mate
the positive on the ciggy lighter cus its switched power meaning when u turn ur key to accesorys it will power up which is wat u want 
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| mystery |
|
||
|
thanks for the advice mate.
the car is a mates, i have put everything in, all wired up EXCEPT the ignition wire. put it into the smoke lighter, nothing happens so i thought bloody hell i gotta rewire the whole thing cos i made a mistake. but the cigarette lighter doesn't work in the first place he said so thats why... (i removed the positive from the lighter and replaced it with my ignition wire - this is right yeh? or would i need to splice them together?) so basically i'm after another source for the ignition wire. i have read that the ACC fuse can be used, anyone know where i can tap into it? cheers |
||
| Top | |
||
| vrblou02 |
|
|||
|
yes thats right
using the power wire from the cigarette lighter should work reason being the lighterdoesn work is probably the lighter itself
_________________ THE V8 OUTLAW |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 13 guests |
