|
GeZza200 |
|
||
|
Steady ED wrote: Do you want a fast car, or a car that pulls a nice number on a dyno?
I dont really care what it pulls on the dyno im just saying i want 150rwkw because that to me seems where it would feel fairly powerful. I want a car that will plant you back into the seat, i wouldn't mind if it was to get into mid-high 14's. But using the auto and the diff gears, does it just mean it will take a while to get the power? or it will stall and run like crap? I dont want the same sort of power it has at the moment, it's so linear. Which is good, but you dont really get to feel it as much. In a few of my mates cars they feel quicker then mine but mine is actualy alot quicker its just how the power comes in i think.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
Top | |
FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
well do it once, do it properly i'd say
3.9 or 4.11 diff gears, preferably with LSD 2800rpm stall and a mild cam like wade 1673 or cms stg 2 These things wont net you a mid 14 but will make it very fun to drive and expect high 14's/flat 15's on the strip i'd say. Plus your car will remain very streetable and fuel economy wont change much at all, and should be enough to f**k off most pre-LS1 bombadores But with the stall you should fit a bigger tranny cooler, although this should be done anyway for better gearbox life And if you ever wanted to go bigger in the future, cam swaps and valve spring change is easy but you will need some sort of tunable chip as well |
||
Top | |
krisisdog |
|
|||
|
I think LSD/Lokka would be a requirement with 150rwkw, especially if you have a 3.5+ diff gears. It'll just be non stop wheelspin thru 1st-2nd otherwise.
|
|||
Top | |
GeZza200 |
|
||
|
ok cheers im just going have to keep looking around for a diff.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
Top | |
USELESS |
|
||
|
5rwks from headwork only?Bs is what I say!! I did my own head from books and a slightly bigger cam and this got me from 141 to 170.1 rwkws!!
I knew nothing about porting .I am not a mechanic even. These guys are proffessionals? Maybe?Do they know what theyre talking about? Obviously not. Talk to Joe Crescent fr a more realistic idea and great service.
_________________ 14.77 @92.71mph July 06 14.52@95.68mph July 07 14.241 96.7 MPH in a shoebox/taxi au ford wagon!!Bwahahah still cant believe it!!! |
||
Top | |
FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
^^ so your AU wagon auto dialed up 141kw at the wheels stock?
|
||
Top | |
USELESS |
|
||
|
The car had stock head dev 4 cam 3.73 diff and 2500 stallie jim mock extractors and edit tune.Ran 14.7 et. It pulled 141 rwkws consistently many times on the same dyno.So I went to that dyno to see consistency.
As a stocker it went on a different dyno.Joes from crescent motorsport dyno it was and the car pulled 109rwkws..with xorst/extractors. Also I have 4:11 lsd and I think it is a bit too much for the daily driver.Go 3.73 or 3.9's the most.
_________________ 14.77 @92.71mph July 06 14.52@95.68mph July 07 14.241 96.7 MPH in a shoebox/taxi au ford wagon!!Bwahahah still cant believe it!!! |
||
Top | |
gogetta |
|
|||
|
USELESS wrote: 5rwks from headwork only?Bs is what I say!! I did my own head from books and a slightly bigger cam and this got me from 141 to 170.1 rwkws!!
I knew nothing about porting .I am not a mechanic even. These guys are proffessionals? Maybe?Do they know what theyre talking about? Obviously not. Talk to Joe Crescent fr a more realistic idea and great service. can i ask what areas of the port / chamber u concentrated on? also did u flowbench it before and after?
_________________ |
|||
Top | |
Jim Beam |
|
|||
Age: 35 Posts: 3505 Joined: 1st May 2005 Ride: EB Fairmont Location: Northern Suburbs, Adelaide |
GeZza200 wrote: ok cheers im just going have to keep looking around for a diff.
If you have an open centre now, just look for 3.9 gears and buy a lokka. http://www.4wdsystems.com.au/html/lokka.htm You want the Borg Warner 28 Spline. Also go to jaycar and get a speedo corrector, they are usually fairly accurate.
_________________ Doin it for Scotty. |
|||
Top | |
USELESS |
|
||
|
It took me 12 months to port my head. I concentrated on the whole thing. Also it didnt help when my port n polish hanheld tool caught fire...I finished most of the head with a ryobi drill!!
_________________ 14.77 @92.71mph July 06 14.52@95.68mph July 07 14.241 96.7 MPH in a shoebox/taxi au ford wagon!!Bwahahah still cant believe it!!! |
||
Top | |
gogetta |
|
|||
|
USELESS wrote: It took me 12 months to port my head. I concentrated on the whole thing. Also it didnt help when my port n polish hanheld tool caught fire...I finished most of the head with a ryobi drill!!
did u notice any loss of low down performance?
_________________ |
|||
Top | |
USELESS |
|
||
|
The car felt stronger everywhere.From 14.773 the headwork and a bit of tuning has gotten me to 14.241 96.7 mph.
_________________ 14.77 @92.71mph July 06 14.52@95.68mph July 07 14.241 96.7 MPH in a shoebox/taxi au ford wagon!!Bwahahah still cant believe it!!! |
||
Top | |
hans hartman |
|
||
|
GeZza200 wrote: Steady ED wrote: Do you want a fast car, or a car that pulls a nice number on a dyno? I dont really care what it pulls on the dyno im just saying i want 150rwkw because that to me seems where it would feel fairly powerful. I want a car that will plant you back into the seat, i wouldn't mind if it was to get into mid-high 14's. But using the auto and the diff gears, does it just mean it will take a while to get the power? or it will stall and run like crap? I dont want the same sort of power it has at the moment, it's so linear. Which is good, but you dont really get to feel it as much. In a few of my mates cars they feel quicker then mine but mine is actualy alot quicker its just how the power comes in i think.
_________________ R.I.P HANS HARTMAN |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 93 guests |