|
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
May 99 onwards is smart shield - AU1 Update
Should be interesting to see if it all works.
_________________
|
|||
| Top | |
|||
| twase |
|
|||
|
{USERNAME} wrote: u should be able to turn smartshield of Thats Smartlock not smartshield unfortunately.
send XR9Ute a pm  also iirc there was some place selling a bypass for it or was that smartlock?
_________________ BF Fairmont Ghia Series II update. Last edited by twase on Sun May 25, 2008 9:41 pm, edited 1 time in total. |
|||
| Top | |
|||
| gogetta |
|
|||
|
keep up the good work mate!!!
very interested in this myself as it opens up the OBD & tuning possibilities quite a bit
_________________ |
|||
| Top | |
|||
| AU99 |
|
|||
|
only real difference with smartlock to smartsheild is you have a coded key. Youwill prbably have to get ford to reprogram the key, BEM & ECU unless you get them all out the same car otherwise its making sure you get everything right and get it towed to ford for a program.
_________________ 2003 BA Falcon Egas Taxi Pack - XR Replica |
|||
| Top | |
|||
| twase |
|
|||
|
Putting the AU smartshield BEM + locks would be a pain, I think I need to stick with smartlock. Anyway I have a smartlock AU BEM, Barrel and ECU on the way, just waiting on it to arrive.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Nigel |
|
||
|
Didnt see it in the discussion, but the killer is the AU IMAP Sensor - the Intake air wiring is the same, however the MAP uses an analog signal instead of the PWM signal of the EA-L.
So to do the mod you would need to use the AU upper manifold, a little rewire, and change the ECU at the least. From there your looking for any pin differences. |
||
| Top | |
||
| twase |
|
|||
|
{USERNAME} wrote: Didnt see it in the discussion, but the killer is the AU IMAP Sensor - the Intake air wiring is the same, however the MAP uses an analog signal instead of the PWM signal of the EA-L. I got all the goodies waiting So to do the mod you would need to use the AU upper manifold, a little rewire, and change the ECU at the least. From there your looking for any pin differences. 
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Nigel |
|
||
|
Im interested in the difference!.
I have LPG Running *perfect* on mine now (I do have the programming cable), but I think I may need a ticky ECU for petrol to smooth things out |
||
| Top | |
||
| needfordspeed |
|
||
|
Was wondering if anyone got this going or not?
_________________ 1988 EA S-Pack|MPI|LSD|AIT turbo manifold|Garrett GT3540|3" Exhaust turbo back|Resprayed|microtech LT8s|60lb Injectors|Bosch 044 with surge tank|3000 RPM stall|Ported AU head|Wade turbo cam|Crow double valve springs|1.3mm MLS headgasket|C4 conversion|Built bottom end|10.6@125MPHi |
||
| Top | |
||
| twase |
|
|||
|
Not yet but I have all the bits now.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 18 guests |
