|
| joolz |
|
|||
|
Bought a temp sensor today for my EL I6 and the salesperson asked me which one?? I thought there was only the one thats on the thermostat housing but the other one that he showed me was a smaller barrel type that about the size of a ciggy butt with a single spade terminal. If this one does exist on the I6 where is could it be located?? Its apparently to sent temps to the ECU.
|
|||
| Top | |
|||
| alfy |
|
|||
|
coud be hybrid/non hybrid?
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| relaxed_diplomacy |
|
||
|
From what i've read so far the multi-wire plug is for the ECU, and on the EBII etc the single spade talks to the dash temp guage. I'm not sure about the EL, but i have an EL motor and thermostat housing so i should know or could check, but then so could you, i guess. But i'm sure someone will know.
_________________ wrecking 9/97 EL fairmont sedan burgundy 6cyl auto 270k modBAintake |
||
| Top | |
||
| FORDom |
|
||
|
i think one is for climate control (do u have climate?)
|
||
| Top | |
||
| joolz |
|
|||
|
Yeah i have climate control but im sure they wouldnt have a seperate sensor just for that on the engine. I've had off the head before and have never had to unplug anything from the main loom apart from 1 temp sensor, oil sender, knock sensor, speedo sender/trans loom. I have never seen of heard of this other temp sensor till today. Unless he was talking about the external temp sensor that is for climate control that i have never actually seen in my car before as its located at the front of the car.
|
|||
| Top | |
|||
| Steady ED |
|
|||
|
He's getting his E-Series 4Ls mixed up I think.
EF/EL don't have a seperate temp sensor for climate control or dash because they both get that data from the ECU.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| TROYMAN |
|
||
|
yep
in the ef/el all the info is recieved from the large coolant temp sensor on the thermostat housing and the ecu does the rest.. but in eb/ed thay have a large collant temp sensor for the ecu.and a seperate sender for the temp guage(small one with the spade terminal) and a 3rd one for climate controle. |
||
| Top | |
||
| snap0964 |
|
|||
|
The above posts are correct.
The gauge sender is compatible between EBII and EL, the calibration is the same, EA/EBI is slightly different. Why do you need a new temp sensor? - they're normally trouble free.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| FORDom |
|
||
|
yeh sorry my bad..i was thinking of my old ED. Havent had a proper look at the el's setup yet.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 113 guests |
