|
| crispykman |
|
||
|
anyone know if you can get straight cut gears for a worked ef 4.0L engine
|
||
| Top | |
||
| Xflow |
|
|||||
Age: 36 Posts: 721 Joined: 31st Dec 2005 Ride: EF V8 Futura, 180sx Location: Brisbane, Burpengary |
what straight cut gears for timming???
if so how do you plan to get that to work? it timming chain see pic
_________________ Ford EF Futura Black
|
|||||
| Top | |
|||||
| krisisdog |
|
|||
|
Either that or for the 'box.
|
|||
| Top | |
|||
| crispykman |
|
||
|
well i dont know thats why i`m asking to see if any one makes straight cut gears to replace the chain. Just like v8`s go straight cut gears so you have no timing chain
|
||
| Top | |
||
| XR6EB |
|
||
|
I've been looking for years, and have never found any.
_________________ EB S XR6
|
||
| Top | |
||
| Krytox |
|
|||||
|
Thats because no idiot would make them.
Think about it, the front end would end up looking like a Lucas Oil Stabiliser Display. You'd be better off with a belt setup. but once again, what for and no-one would and too much work for a aussie engine.
_________________ Carefree, we may not be number one, but we're up there. |
|||||
| Top | |
|||||
| XR6EB |
|
||
|
Krytox wrote: Thats because no idiot would make them.
Think about it, the front end would end up looking like a Lucas Oil Stabiliser Display. You'd be better off with a belt setup. but once again, what for and no-one would and too much work for a aussie engine. Running a Jim Mock DEV 5 cam, I "stretched" the timing chain and broke the chain guides TWICE in the first 11000km of my rebuild!!!! Straight cut gears would have eliminated this issue and saved me $2000 in repairs [the second time a pieces of the chain went into the sump and destoryed the oil pump as well. The car stopped in the middle of Liverpool. $$$$ expensive trip getting it towed home + the time off work with no car + cancelling my holidays because I used up the money on the repairs !!!] And yes, I did realise that it would end up looking like a Lucas Oil display, but I wasn't concerned if it resloved my issues! Anyway, thats just my feedback. Hopefully others can learn from my experiences.
_________________ EB S XR6
|
||
| Top | |
||
| fiftyone |
|
|||
|
how often do the chains on an i6 need replacing, if at all?
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
| Top | |
|||
| FairmontXR6 |
|
|||
|
XR6EB wrote: Krytox wrote: Thats because no idiot would make them. Think about it, the front end would end up looking like a Lucas Oil Stabiliser Display. You'd be better off with a belt setup. but once again, what for and no-one would and too much work for a aussie engine. Running a Jim Mock DEV 5 cam, I "stretched" the timing chain and broke the chain guides TWICE in the first 11000km of my rebuild!!!! Straight cut gears would have eliminated this issue and saved me $2000 in repairs [the second time a pieces of the chain went into the sump and destoryed the oil pump as well. The car stopped in the middle of Liverpool. $$$$ expensive trip getting it towed home + the time off work with no car + cancelling my holidays because I used up the money on the repairs !!!] And yes, I did realise that it would end up looking like a Lucas Oil display, but I wasn't concerned if it resloved my issues! Anyway, thats just my feedback. Hopefully others can learn from my experiences. I had the same issues with my dev5 cam/head kit. I had the chain and gears and guides replaced the next day after we fitted the kit. Cam stretched the chain again, took the cam back out 4 weeks later and put in the stock xr cam, then put in a billet from surecam - no problems since. I wouldn't mind the straight cut gear setup, even if it is a bit noisy. Once I get the block rebuilt, a new chain will go in again. As quoted, I hope ppl learn from my experiance as well.
_________________ 1993 Ford Fairmont EB II 5.0L V8 Wagon |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
XR6EB wrote: Krytox wrote: Thats because no idiot would make them. Think about it, the front end would end up looking like a Lucas Oil Stabiliser Display. You'd be better off with a belt setup. but once again, what for and no-one would and too much work for a aussie engine. Running a Jim Mock DEV 5 cam, I "stretched" the timing chain and broke the chain guides TWICE in the first 11000km of my rebuild!!!! Straight cut gears would have eliminated this issue and saved me $2000 in repairs [the second time a pieces of the chain went into the sump and destoryed the oil pump as well. The car stopped in the middle of Liverpool. $$$$ expensive trip getting it towed home + the time off work with no car + cancelling my holidays because I used up the money on the repairs !!!] And yes, I did realise that it would end up looking like a Lucas Oil display, but I wasn't concerned if it resloved my issues! Anyway, thats just my feedback. Hopefully others can learn from my experiences. it'd be easier and cheap to just buy a different cam. the cam is the problem, not timing chain. |
||
| Top | |
||
| Nigel |
|
||
|
I had similar issues on a 4.1 engine I had rebuilt. The combination of Stage 4 cam and high volume oil pump did the damage - but on that car it was the dizzy drive gears that got munched. Apparently if you had big valve springs the cam would flex as well causing a poor fit to the oil pump gear.
Some very very carefull thought is required for big cams. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 124 guests |
