|
| daggy082 |
|
|||
|
Just wanting to know if any1 has used one of these cams? The main reason why im getting a new cam is that i have to replace the lifters so i thought why not make a bit more power. Im also getting new valve springs. Would like to know wat else i should look at getting to make it more worth while. Thanks
_________________
|
|||
| Top | |
|||
| DJ_Brown |
|
|||
Age: 37 Posts: 290 Joined: 10th May 2006 Ride: 5 Spd EA Wagon, 5 spd EF Fairmon Location: Melbourne |
i just fitted new lifters and a 519 cam in my EF Fairmont. Not a radical cam, but made a difference. Still has a smooth idle, etc..
I also have the vernier gear for the cam (but havent installed it yet) but it is recommended to get an accurate cam setting. Overall driveability was improved, and seems a decent combination with the 2700 highstall in the fairmont too.. Good luck! David
_________________ If you're not driving a manual, you are only steering... |
|||
| Top | |
|||
| Timmeh |
|
||
|
Get some roller rockers. Throw those pressed jobbies away.
|
||
| Top | |
||
| sooty72 |
|
|||
|
Timmeh wrote: Get some roller rockers. Throw those pressed jobbies away.
Huh? WTF are you on about? 
I have that cam in my ute, and I'm very happy with it. Get a set of Crow springs to suit, dial it in straight up with the vernier gear and you will be very happy. Nice smooth idle, nice sound, works well with extractors and a good exhaust. Pulls like a schoolboy down low. 
_________________ Yes, I own a Ute. No, I won't help you move! |
|||
| Top | |
|||
| green car |
|
||
|
Timmeh wrote: Get some roller rockers. Throw those pressed jobbies away.
Its a six not a windsor,sixes have a roller valve train as stock. 
Also i am interested to see how this cam would go also, because i will be getting a crow when i do get a cam.
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| racer |
|
||
|
I would get the vernier gear with the cam.
If you have had the head done & au gasket it will throw the cam timming out. With the gear you can adjust it back to top dead center. Why don't you try a wade 1636 cam it has got slightly bigger lift & duration.
_________________ FORD EL 4.0L. Crow cam, T.I Performance J3 Chip, Vernier cam gear, SPR ported head, 68mm TB, AU head gasket + ARP studs, AU injectors, Pacey 4480, High flow cat, Shift kit, Stallie, 3:73 TrueTrac. |
||
| Top | |
||
| daggy082 |
|
|||
|
racer wrote: I would get the vernier gear with the cam.
If you have had the head done & au gasket it will throw the cam timming out. With the gear you can adjust it back to top dead center. Why don't you try a wade 1636 cam it has got slightly bigger lift & duration. Wats a vernier worth?
_________________
|
|||
| Top | |
|||
| racer |
|
||
|
I forgot how much i paid for mine but i think about $150 give & take
_________________ FORD EL 4.0L. Crow cam, T.I Performance J3 Chip, Vernier cam gear, SPR ported head, 68mm TB, AU head gasket + ARP studs, AU injectors, Pacey 4480, High flow cat, Shift kit, Stallie, 3:73 TrueTrac. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 122 guests |
