|
Alex_EL |
|
|||
|
Hi
Is it true that if you install a shift kit then u have to replace alot of the other transmition parts to deal with higher temps or whatever? They seem like quite a good option and if anyone has some good info on them, it will be appreciated. I have checked out, shiftkits.com.au but that only tells u so much.. Thanks in advance
_________________ 1997 EL Fairmont [EHELL] Mods: 2.5" straight through Redback Mandrel Bent Exhaust from cat back, BA XR8 18" Replica's, LPG conversion, Kingspring Superlows - front and rear, Monroe GT lowered shocks all round, Clear side repetors, FPV front floor mats.. |
|||
Top | |
Alex_EL |
|
|||
|
we r off to a flyer.. anyone?
_________________ 1997 EL Fairmont [EHELL] Mods: 2.5" straight through Redback Mandrel Bent Exhaust from cat back, BA XR8 18" Replica's, LPG conversion, Kingspring Superlows - front and rear, Monroe GT lowered shocks all round, Clear side repetors, FPV front floor mats.. |
|||
Top | |
Spoondog |
|
|||
|
no u dont, unless ur making huge power, a electronic shift kit u wont need to do anything to strenghten the box. imo its a huge wank, i did it to mine for $3, and it still wasnt worth it, get a manual.
_________________ R33 GTS-T - 222.6rwkw |
|||
Top | |
Alex_EL |
|
|||
|
lol doubtful on manual prospects...
yeah i will do some research on it, theyr only like 75-90 dollars... but if u say they do nothing...
_________________ 1997 EL Fairmont [EHELL] Mods: 2.5" straight through Redback Mandrel Bent Exhaust from cat back, BA XR8 18" Replica's, LPG conversion, Kingspring Superlows - front and rear, Monroe GT lowered shocks all round, Clear side repetors, FPV front floor mats.. |
|||
Top | |
haggis |
|
|||
|
FPV GT Alex wrote: lol doubtful on manual prospects...
yeah i will do some research on it, theyr only like 75-90 dollars... but if u say they do nothing... Using magical powers unknown to most forum users (the search function) i have found this thread for you to read http://www.fordmods.com/forums/viewtopi ... hift%20kit
_________________ I can see through wooden doors. |
|||
Top | |
Alex_EL |
|
|||
|
shiftkits.com.au says, that:
"The module alters the signal the engine / transmission control unit provides to the transmission to control the line pressure. By slightly increasing the line pressure, the transmission changes harder from one gear to the next. This not only reduces heat generated within the clutches and bands in the transmission, but also will increase transmission life and reduce wear." "The single stage modules provide a firmer shift that is selectable by the flick of a switch, whereas the two stage modules have two independently selectable stages of shift firmness which can also be selected by a switch." What is 'Shift firmness' may i ask? and what are they claiming in plain english.. Thanks
_________________ 1997 EL Fairmont [EHELL] Mods: 2.5" straight through Redback Mandrel Bent Exhaust from cat back, BA XR8 18" Replica's, LPG conversion, Kingspring Superlows - front and rear, Monroe GT lowered shocks all round, Clear side repetors, FPV front floor mats.. |
|||
Top | |
Alex_EL |
|
|||
|
haggis wrote: FPV GT Alex wrote: lol doubtful on manual prospects... yeah i will do some research on it, theyr only like 75-90 dollars... but if u say they do nothing... Using magical powers unknown to most forum users (the search function) i have found this thread for you to read http://www.fordmods.com/forums/viewtopi ... hift%20kit cheers haggis
_________________ 1997 EL Fairmont [EHELL] Mods: 2.5" straight through Redback Mandrel Bent Exhaust from cat back, BA XR8 18" Replica's, LPG conversion, Kingspring Superlows - front and rear, Monroe GT lowered shocks all round, Clear side repetors, FPV front floor mats.. |
|||
Top | |
Spoondog |
|
|||
|
they do work, my stock ef chirped changing into second with it in the dry. Just makes the gearbox shift firmer and slightly faster.
_________________ R33 GTS-T - 222.6rwkw |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 21 guests |