|
| MICKYYYY |
|
||
|
Hi All,
Wondering who stocks RHS heads in Australia but prefer Sydney if at all possible??? Also do ppl have any idea how much there worth and if they are any good??? Thanks in adavance
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| BOTTLEDUP |
|
|||
|
RHS are stocked by Performance Wholesale in Slacks Creek.
They are OK, but not in the same league as AFR or Trickflow out of the box. We did a set of RHS 200cc heads recently and got them to over 310cfm, but that was $1500 worth of porting.
_________________ TE50 T1 P01 |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
WOW that much on porting, might as well just buy AFR 205cc and away you go.
How much are RHS heads worth roughly???
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| Macca |
|
|||
|
{USERNAME} wrote: RHS are stocked by Performance Wholesale in Slacks Creek.
They are OK, but not in the same league as AFR or Trickflow out of the box. We did a set of RHS 200cc heads recently and got them to over 310cfm, but that was $1500 worth of porting. Out of interest do you have a flow chart for the ported heads?
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| xcabbi |
|
||
|
Are RHS heads the old Pro Topline heads from New Zealand?
|
||
| Top | |
||
| Macca |
|
|||
|
{USERNAME} wrote: Are RHS heads the old Pro Topline heads from New Zealand?
Yep or the Pro Cyclone, same thing. http://www.pavtek.com.au/index.php?opti ... &Itemid=33 http://www.racingheadservice.com/Inform ... onfig215cc http://www.fordmuscle.com/archives/2006 ... /index.php
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
YEP Comp cams bought them out..
All these companies are under the one umbrella.. Edit.. Ooops below is refering to other post.. Being CNC'd they should be as good as any head.. As Pete refered to .. Alittle big for std -sh engine esp 5.0.. Port volume is quite large... Though alot of that depends on rest of combination? Lenght of inlet runners, compression, cam etc...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 11 guests |
)