|
| efmarek |
|
||
|
Howdy, im after a set of good nic Cop rims for my EF.
_________________ LUMPY-6 |
||
| Top | |
||
| efmarek |
|
||
|
*bump*
_________________ LUMPY-6 |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
good luck mate
the only other option is to get a standard set widened and that costs roughly 250 a pair depending where you go |
||
| Top | |
||
| efmarek |
|
||
|
FordFairmont wrote: good luck mate
the only other option is to get a standard set widened and that costs roughly 250 a pair depending where you go You saying im gonna have a hard time finding some?? How wide can they stretch stockies??
_________________ LUMPY-6 |
||
| Top | |
||
| xhxrsix |
|
|||
|
are the cop ones wider than normal rims??? i thought they were the same?
_________________ EF V8T 11.54 @118mph |
|||
| Top | |
|||
| efmarek |
|
||
|
xhxrsix wrote: are the cop ones wider than normal rims??? i thought they were the same?
A fair few people think that also.............and they should be ashamed of themselves! 
No the cop rims are bigger AND wider.
_________________ LUMPY-6 |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
efmarek wrote: FordFairmont wrote: good luck mate the only other option is to get a standard set widened and that costs roughly 250 a pair depending where you go You saying im gonna have a hard time finding some?? How wide can they stretch stockies?? yes their hard to find. Interceptors are 7" wide, normal ones are 6" wide A race shop can make them as wide as you want. I had mine widened to 7" but left the same backspacing so it had a deep dish.... looked pretty cool |
||
| Top | |
||
| efmarek |
|
||
|
so can u easily fit 225 tyres on them....maybe even 235??
_________________ LUMPY-6 |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
max recommended width:
6" rim - 225's 7" rim - 235's Of course you can put whatever you want on them, but they will look like balloons, and tread will be lifted up at the edges which defeats the purpose of a wider tyre |
||
| Top | |
||
| efmarek |
|
||
|
235....id be very happy with that!
but id rather a 16 rim over a crap 15
_________________ LUMPY-6 |
||
| Top | |
||
| Sloxr6 |
|
|||
Age: 40 Posts: 862 Joined: 8th May 2005 Ride: BA Wagon Turbo, Ba Fairlane G220 Location: Colac |
here you go mate might be a bit late now but
http://cgi.ebay.com.au/4-Rims-Ford-5-stud-pattern-15-x7_W0QQitemZ110273893466QQihZ001QQcategoryZ43953QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
_________________ Congo Green Ba Wagon With F6 6 Speed Manual Driveline. |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
^^ that looks interesting but the offset doesnt look quite right. Be worth a try though if it goes cheap enough
|
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
i contacted the seller of the rims and he said the backspacing is 120mm.
Now if i can remember correctly, the stock width rims have 98mm backspacing, so these Mercedes rims have the extra inch going inwards so im not sure if it would foul the suspension or not |
||
| Top | |
||
| efmarek |
|
||
|
Dellar69 wrote: here you go mate might be a bit late now but
http://cgi.ebay.com.au/4-Rims-Ford-5-stud-pattern-15-x7_W0QQitemZ110273893466QQihZ001QQcategoryZ43953QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Jeez, i wasnt expecting this much intervention! Thanks fellas!
_________________ LUMPY-6 |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 36 guests |
