Fordmods Logo

GRA setup - do you have one? If so, help me out with some de 

 

Page 2 of 2 [ 30 posts ] Go to page Previous  1, 2

 
Posted: Sun Jul 13, 2008 8:15 pm 
Getting Side Ways
Offline
User avatar

Posts: 2644

Joined: 6th Nov 2004

Gallery: 8 images

Ride: 2007

Location: Mount Annan
NSW, Australia

{USERNAME} wrote:
{USERNAME} wrote:
I would take a punt and say its a primer for LPG only starting.


Yours isn't full GRA is it? Your running GRA throttle body with some other converter (from the pictures your converter looks larger and is mounted vertically).
I originally though it was for gas starting, however, one of the documents I have here talks about it opening at cruise and whatnot aswell.
No, Mine is a factory tickford with the GRA carb replacing the mixer ring.
I did have a GRA B2 (same as yours) installed for a while but there was no decernable difference so I put the vialle back on.

 

_________________

BF Fairmont Ghia Series II update.
GQ XR6T ghia patrol.

,======o00o
//__|__|_,\_____\,___
|_/--\'_|'__|_/--\_[]IIII[]
_( o ) )_____( o ) )=o=) )__

Top
 Profile  
 
 
Posted: Sun Jul 13, 2008 11:32 pm 
Getting Side Ways
Offline
User avatar

Posts: 3331

Joined: 27th Dec 2004

Gallery: 4 images

Ride: MCMXCV Falcon

Location: G town
VIC, Australia

i think that that solenoid is for cold start priming...cause if u look at a impco L converter that is how they do it...B2 is a copy of the impco

 

_________________

Image

Top
 Profile  
 
 
Posted: Mon Jul 14, 2008 10:49 am 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 4304

Joined: 5th Nov 2004

Gallery: 9 images

Ride: EF Falcon XT-T

Location: Mornington Peninsula
VIC, Australia

the solenoid is for cold start priming, but i beleive its also used with the closed loop controller to richen the mixture when u stab the throttle.

It goes to one of the ports on the under side of the throttle body.

as seen in the pics, the other line goes to the ISC Block.

I've pulled mine apart a few times so i could remmeber where everything went

 

_________________

FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw
DTHWGN - EA GL Wagon, LTD Interior, Satin Black, 5.0, Turbo
RACER - EF Futura , 5.0, 5 Speed
PROJECT - 83 Thunderbird, Lowered, 18" Billet Wheels
DAILY - BA Fairmont Ghia 5.4 3V

Top
 Profile  
 
 
Posted: Mon Jul 14, 2008 10:53 am 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 4304

Joined: 5th Nov 2004

Gallery: 9 images

Ride: EF Falcon XT-T

Location: Mornington Peninsula
VIC, Australia

the above converter is a GRA converter.

its also worth noting that normal B2's can be converted to work with GRA systems with a $12 spring kit.

 

_________________

FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw
DTHWGN - EA GL Wagon, LTD Interior, Satin Black, 5.0, Turbo
RACER - EF Futura , 5.0, 5 Speed
PROJECT - 83 Thunderbird, Lowered, 18" Billet Wheels
DAILY - BA Fairmont Ghia 5.4 3V

Top
 Profile  
 
 
Posted: Mon Jul 14, 2008 11:26 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

Thanks for that. It answers my questions, but creates a new problem for me now. I don't have a connection on my throttle body for the line from the starter primer to connect to.

gogetta - any chance of a photo showing specifically were the line from the starter primer connects to on the throttle body?

I think the only difference is that I removed the barb from the starter primer and fitted it into the converter, were you've got a line running to it remotely mounted.
Top
 Profile  
 
 
Posted: Mon Jul 14, 2008 11:41 am 
Getting Side Ways
Offline
User avatar

Age: 41

Posts: 4304

Joined: 5th Nov 2004

Gallery: 9 images

Ride: EF Falcon XT-T

Location: Mornington Peninsula
VIC, Australia

on the underside of my TB i have 4 very small brass fittings.

2 arnt drilled, 2 are.
one goes to where the metering rod is (progressive circuit)
second one goes to the solenoid you're mentioning.

 

_________________

FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw
DTHWGN - EA GL Wagon, LTD Interior, Satin Black, 5.0, Turbo
RACER - EF Futura , 5.0, 5 Speed
PROJECT - 83 Thunderbird, Lowered, 18" Billet Wheels
DAILY - BA Fairmont Ghia 5.4 3V

Top
 Profile  
 
 
Posted: Wed Jul 16, 2008 6:11 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

{USERNAME} wrote:
on the underside of my TB i have 4 very small brass fittings.

2 arnt drilled, 2 are.
one goes to where the metering rod is (progressive circuit)
second one goes to the solenoid you're mentioning.


I need to drill 1 of those holes then. Do you know which 1 it is - http://www.gasresearch.com.au/IN-0009.pdf (see the second half of the page). I'm guessing it's the vapour injection port, but would love confirmation before I drill...
Top
 Profile  
 
 
Posted: Wed Jul 16, 2008 9:44 pm 
Getting Side Ways
Offline

Age: 55

Posts: 903

Joined: 7th Sep 2007

Gallery: 3 images

Ride: BF3 Egas wag SY AWD Terry Ghia

Location: Brookfield
VIC, Australia

have you looked at the converter manufacturers site yet?
http://www.lgmotorgas.com.au/navigation.htm

 

_________________

BF3 Egas XT Wagon
SY Territory Ghia AWD 6spA :))

Top
 Profile  
 
 
Posted: Thu Jul 17, 2008 6:47 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

{USERNAME} wrote:
have you looked at the converter manufacturers site yet?
http://www.lgmotorgas.com.au/navigation.htm


Nothing on that site in the way of documents. And they're the original manufactuer of the converter, but GRA rebuilt it and supplied the rest of the components.
Top
 Profile  
 
 
Posted: Thu Jul 17, 2008 6:48 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

{USERNAME} wrote:
on the underside of my TB i have 4 very small brass fittings.

2 arnt drilled, 2 are.
one goes to where the metering rod is (progressive circuit)
second one goes to the solenoid you're mentioning.


Just had a feel and bit of a look under mine and there's only 2 brass fittings under there 1 already with a hose, need to remove it and drill out the other one than i guess.
Top
 Profile  
 
 
Posted: Sat Jul 19, 2008 9:31 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

I drilled the other brass fittign out under my throttle body. There's only 2 there. The one that I just drilled out isn't the correct one I don't think, but I'm going to give it a go.
Top
 Profile  
 
 
Posted: Sat Jul 19, 2008 9:31 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

Anyone know what this is? Is itt some sort of jet or valve in the line?

{DESCRIPTION}
{DESCRIPTION}
Top
 Profile  
 
 
Posted: Sat Jul 19, 2008 10:36 pm 
Getting Side Ways
Offline
User avatar

Posts: 3331

Joined: 27th Dec 2004

Gallery: 4 images

Ride: MCMXCV Falcon

Location: G town
VIC, Australia

its just a hose clamp

 

_________________

Image

Top
 Profile  
 
 
Posted: Sun Jul 20, 2008 1:48 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

{USERNAME} wrote:
its just a hose clamp


dang, how stupid of me. somehow, i managed to miss noticing the entire band of the clamp, only saw the screw part inline with the hose and started wondering if it was something funny...
Top
 Profile  
 
 
Posted: Sun Aug 03, 2008 11:41 pm 
Parts Gopher
Offline
User avatar

Age: 44

Posts: 85

Joined: 1st Aug 2008

Gallery: 34 images

Ride: EF fairmont + upgrades

Location: Werribee
VIC, Australia

here is a picture from the gra webpage of one fitted and painted
http://gasresearch.com.au/ford6cyl.JPG

i dont know how to put pictures up

 

_________________

need a rotisserie for a classic resto 0471525912 Tom

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 30 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 10:13 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names