|
| WagonDad |
|
|||
|
The screamin Deamon coils with the AU 111 leads look like a feasable option, did a net search and the performance gains seem to be there.
Any one got a price on the Screamin Deamon coil #31738. Hey twr7cx the MSD Dis-4 HO is recommended for drag or high boost applications, the standard Dis-4 produces around 115mj and the HO produces around 170mj from memory, I know where you can get a HO new for $450.
_________________ 4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
WagonDad wrote: Hey twr7cx the MSD Dis-4 HO is recommended for drag or high boost applications, the standard Dis-4 produces around 115mj and the HO produces around 170mj from memory, I know where you can get a HO new for $450.
Does that mean that it would be bad to run it for a low boost (9psi) road car. Or just that it would be overkill? Overkill is fine, but if it's going to be causing other issues, then it's not good. $450.00 seems to be an extremely good price! |
|||
| Top | |
|||
| WagonDad |
|
|||
|
twr7cx wrote
Does that mean that it would be bad to run it for a low boost (9psi) road car. Or just that it would be overkill? Overkill is fine, but if it's going to be causing other issues, then it's not good. $450.00 seems to be an extremely good price. The HO would definately be overkill for N/A, I reckon your plugs leads and coil would have to be up to the task just to handle the extra power. The HO for $450 is New second hand but it is on a Ho***n web site, I hate to admit it but I joined just to buy my Dis-4.
_________________ 4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
|
|||
| Top | |
|||
| WagonDad |
|
|||
|
Recieved my MSD Dis-4 ignition module today, has $720 written on the box, Cappa quoted me $650 I paid $420 inc postage happy with that. Checked out the Accel coils, I am going to create an account and get a price including postage from Summit Racing America, will post the price up as soon as I get it.
_________________ 4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
|
|||
| Top | |
|||
| WagonDad |
|
|||
|
Price for the Acell Ford 6Tower Dis coil 140036 is $112 U/S Inc Postage, seriously considering ordering this coil, and then a decent set of AU 111 leads.
_________________ 4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
|
|||
| Top | |
|||
| Xflow |
|
|||
Age: 36 Posts: 721 Joined: 31st Dec 2005 Ride: EF V8 Futura, 180sx Location: Brisbane, Burpengary |
have you tryed australia suppliers???
Australia Dealers Australian Auto 17 Moncrief Road Nunawading, VIC 3131 Ph: 03 9878 4700 Fax: 03 9877 5263 Performance Wholesale 6 Cronulla Court Slacks Creek Logan City, QLD 4127 Ph: (61) 7380 81986 Fax: (61) 7380 83050. Rocket Industries Pty. Ltd. 40 Huntingwood Drive Huntingwood. NSW 2148, Australia Ph: 02.8825.1900 Fax: 02.8825.1911 VPW Australia 122-128 Cooper St. Epping Victoria Australia, 3076 Ph:011 613 8405-9229 Fax:011 613 8405-9281 http://go.mrgasket.com/DealerLookup.asp ... &BrandID=3
_________________ Ford EF Futura Black
|
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
twr7cx wrote: tickford_6 wrote: WagonDad wrote: 66 coupe wrote: the EF coilpack is three dual output coils..... Yep understand that, but from what I have found out the GM 2 Blaster coils are a direct replacement for the V6 holden, so I am assuming some wiring or small loom would be required to suit the ford. you could also look at the blaster DIS coils, they are single post coil but can be wired in pairs for waste spark. they are only for use with DIS-2 DIS-4 and DIS-HO ignitions. PN:8230 How does that work? The Blaster DIS Coils 8230 (http://www.msdignition.com/coil_blaster_2_8230.htm) - in the User Instructions (http://www.msdignition.com/pdf/8230_frm21166.pdf), it only shows how 4 of them can be connected to the DIS-4. How are 6 set up? Any idea on the differences between the DIS-4 and DIS-4 HO - is the HO able to be used on a road car - it talks about it being from drag application, etc. A coil on plug setup would be nice, as it would get rid of the need to mount the coils somewhere and run ignition leads. I know I'm running out of real estate in my engine bay with the LPG and intercooler pipes. the coils can be wired in pairs. so you'd use 3 of the 4 chanels on the dis-4 |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 35 guests |
