|
| shannonwulff |
|
|||
|
heyy
what voltage/signal is needed to trigger the high series EF BEM to activate the antenna? I bought a new Alpine HU and stocko antenna, which I have confirmed to be working by putting +12 onto. When the stereo is switched to radio, 3-5V is supplied on the signal wire, but when connected to the car does nothing. I have tested the up and down lines at the BEM too, and no power is supplied. has anyone else solved this one? thanks heaps.
_________________ When you do things right, people won't be sure you've done anything at all. |
|||
| Top | |
|||
| knowsfords |
|
||
|
Use a relay?
|
||
| Top | |
||
| shannonwulff |
|
|||
|
providing what to the BEM though? thats what I need to know.
_________________ When you do things right, people won't be sure you've done anything at all. |
|||
| Top | |
|||
| shannonwulff |
|
|||
|
anyone?
_________________ When you do things right, people won't be sure you've done anything at all. |
|||
| Top | |
|||
| maximus |
|
|||
|
Pretty sure the output on the trigger wire of an Alpine headunit should be 12V.
The wire is blue, or blue with a white stripe. If it's only 5V I'd say it's got issues. Regardless, it can switch a relay on, then you can use the relay to provide 12V where it's needed.
_________________ Subtle but high quality audio system. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
