Hi. Just wondering if people have changed from the ed airbox to ef/el airbox setup in the ed. is it possible and how do you run and convert the pipe so it runs from the throttle body on the non bbm manifold to the top of the airbox instead of the bottom of the box like it was originally.

can someone please give me more information

Thats EASY

I have done it before, you need a block off plate, you need to cut a hole in the airbox and shorten the existing throttle body piping.

I have a doc hidden away somewhere about it.

I used an XH snorkle and cut a hole for it to fit into in the top half of the airbox and then sealed off the standard hole with a block off plate,

The lower half I trimmed down the rubber piping and forced it over the lower intake part and out a pod filter on that in the airbox.

Hope that makes some sense.