|
ScottFiske |
|
|||
|
Anyone got slotted brakes on a ABS EL Fairmont ? If so what brand and how much was it.
_________________ The Lion Tamer |
|||
Top | |
data_mine |
|
|||
|
yes (EL Futura), DBA, can't remember, it was all part of a ~$900 service.
Some of the best money I've spent.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
Top | |
tomcolahan |
|
|||
|
yeh same as above, slotted DBA. just ask for them tell them the model and ABS and you will get the right ones
_________________ We'll keep our cow s**t in the country, you keep your bull s**t in the city. |
|||
Top | |
slycruza |
|
||
|
i got cross drilled and slotted dba front and rear.with bendix ultimates all round as well.. awsome setup.. cost me $1200 i think cant remmber properly now?
|
||
Top | |
Timmeh |
|
||
|
slycruza wrote: i got cross drilled and slotted dba front and rear.with bendix ultimates all round as well.. awsome setup.. cost me $1200 i think cant remmber properly now?
$1200 holy s**t!!!!!!!!! I got that setup for a non ABS for $720 from Perth Brake Parts and it only cost $50 for installation. I think the Brake Gods were smiling on me that day. |
||
Top | |
raiki |
|
|||
|
I got all new pads, one new rear caliper, new fluid and two new front DBA cross drilled and slotted rotors for $750.
Mine is an EF Fairmont with ABS, the brakes are identical to the EL.
_________________ Adrian
|
|||
Top | |
tomcolahan |
|
|||
|
im pretty sure my rotors were approx ~$115 from repco for DBA slotteds... but that was nearly 2 years ago
_________________ We'll keep our cow s**t in the country, you keep your bull s**t in the city. |
|||
Top | |
bowsaw |
|
|||
|
Mine were $145 ea, fitted in half hour, with new wheel bearings/pads, simple job, $1200 they saw you coming.
|
|||
Top | |
R.S.R. 54 |
|
||
|
I run rda sloted rotor x4 better than dba's because the slots go to the
out side edge of the rotors and I curently run bendix ultimates but are going to try EBC Green stuff next time as they arn't as hard on the discs and they are supose to work better when cold than ultimates
_________________ R.S.Racing
|
||
Top | |
R.S.R. 54 |
|
||
|
Oh sorry they are also cheaper than DBA's approx $ 130 each
_________________ R.S.Racing
|
||
Top | |
Spork |
|
|||
|
R.S.R. 54 wrote: I run rda sloted rotor x4 better than dba's because the slots go to the
out side edge of the rotors and I curently run bendix ultimates but are going to try EBC Green stuff next time as they arn't as hard on the discs and they are supose to work better when cold than ultimates The slots go to the edge also in DBA's and they cost $120 per rotor.
_________________ Manual EL Gli.
|
|||
Top | |
wolfpac_w |
|
||
|
WOW, $1200... I'm looking at $350 this weekend for the front's and probably the same for the back. That's new DBA slotted rotors, Bendix Advance's, new bearings, fitted!
Helps to to go someone who owns an EL, and to really know the mechanic well... Oh, and to not go to a Ford Dealership anymore! Wolfpac
_________________ Hot Chilli Red EL, Doof, Vrooom and Sittin' Low, the way it should be! |
||
Top | |
data_mine |
|
|||
|
Spork wrote: R.S.R. 54 wrote: I run rda sloted rotor x4 better than dba's because the slots go to the out side edge of the rotors and I curently run bendix ultimates but are going to try EBC Green stuff next time as they arn't as hard on the discs and they are supose to work better when cold than ultimates The slots go to the edge also in DBA's and they cost $120 per rotor. yes My DBAs (I had teh pic already honest, took it after I derusted and painted the hubs)
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
Top | |
slycruza |
|
||
|
mine are the gold cross drilled and slotted dba's i think thast y it cost a bit more..
|
||
Top | |
slycruza |
|
||
|
actually i just found the recipt.. $1050 i paid...
for 4 rotors.. gold dba cross drilled and slotted and bendix ultimates all round as well... |
||
Top | |
Who is online |
---|
Users browsing this forum: Google Adsense [Bot] and 99 guests |