[b]Hi Im looking at putting a AU or BA 4.0L in my XD speedway car
Could any one advise on instalation mods sump ,loom mods etc after market engine managment.Also looking to modify to achieve around
170-190 rwkw.I have heard,I could run a 4barrell carby on the AU
and this would achieve similar kw,s but would have a flater torqe curve
Thanks.

for the Mounts.. recomend using the EA upper and XF lowers (not XG like everyone thinks) and use the XG Sway Bar to fit around the Sump... other ones interfear with the Sump..

now the only thing tha may cause a bit of trouble is the alternator. it may or may not rub on the front .. can either slighly cut the front to allow it not to rub (if its a speedway car u prob not after Show/Shine so can proberly give this a good wack with a sledge hammer so it doesnt hit at all..)

you can use the E series Radiator but u gotta cut the mounts off the sides of the tanks and make up a new mount for it... thats the easy bit.


for the 4 BBL Manifold. Aussie speed sell them.
http://www.aussiespeed.com/details/?page_id=47



if i missed anything then some of the other blokes who have done this conversion feel free to interupt... but i think i covered everything.

*edit* cant spell.. fixed now

THanks P100 Ute Will I have to cut and strengthen the crossmember .

shouldnt need to cut any crossmember by using those mounts i said..

Thanks . Does any body know what where and how of wiring loom mod and ecu.