|
falconboy |
|
|||||
|
2 pics attached.
1. Whats the purpose of that extra piece hanging off half way up the air intake piping? 2. In the second pic, is that a pissy little trans cooler? It has 2 hoses, both on the left hand side, both go through under the headlight - top one looks like it goes to top of radiator, bottom one disappears underneath radiator and connects to a solid pipe. Asked an ebay seller about adding one and mentioned this (didn't say where the hoses go though) and he said its a aircon condensor..... If it is, where do I fit a trans cooler, and if it is a factory trans cooler, is it possible to fit a larger one instead (it seems a bit small), obviously using the same hoses hopefully - but not much room with the rest of the aircon there beside it. Also, if its a trans cooler, wheres the aircon condensor then... Might be dumb questions but there ya go!
|
|||||
Top | |
sexyr6 |
|
|||
|
1- there to reduce induction noise
2- tow pack trans cooler.. |
|||
Top | |
falconboy |
|
||
|
{USERNAME} wrote: 1- there to reduce induction noise
2- tow pack trans cooler.. Thanks mate. Great that its a trans cooler. I thought it might be as it does have a ford tow pack on it (although I need a tongue) and where those hoses go looked to me to be the case. The trans seems ok although twice when coming to a stop in my driveway it seems to have made all sorts of vibrations/noises etc. Think I need to get it serviced. |
||
Top | |
sexyr6 |
|
|||
|
yes, sounds like a service is in order, one on the auto trans should be done about every 50,000k's..
|
|||
Top | |
prydey |
|
|||
|
{USERNAME} wrote: wheres the aircon condensor then...
the a/c condensor is the 'radiator looking' bit directly behind the trans cooler.
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
Top | |
falconboy |
|
||
|
Oh thanks, I didn't even look behind it.
One more thing I've noticed, in the engine bay pic, just beside the power steering pump theres a bracket with some surface rust, and it looks like it has a threaded hole in it that something should or was (or can be) bolted on.....I know its not a great pic but those with the same engine should be able to tell where I mean. Ta |
||
Top | |
banarcus |
|
|||
|
The rusted bracket is for the BBQ plate. You don't have one so I wouldn't worry too much.
|
|||
Top | |
falconboy |
|
||
|
Ah, of course. Thanks.
|
||
Top | |
prydey |
|
|||
|
{USERNAME} wrote: You don't have one.
you don't want one on there either. nearly everyone i know that has one has taken it off.
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
Top | |
Who is online |
---|
Users browsing this forum: Google Adsense [Bot] and 30 guests |