|
| DaveXR8 |
|
||
|
Hi all,
I was trying to remove my rear rotor to adjust the park break shoes but it loks like its been rusted on. Any ideas on how I could get it off? Cheers Dave
_________________ AU3 XR8 Manual, Full options,Pursuit Lip, Boss bonnet, Hurricane extractors, zorst, SS Induction, K&N filter, Flash tuned...191rwkw |
||
| Top | |
||
| lil_lincoln |
|
|||
|
WD 40 is your friend, or there is this stuff called penetrine. both in a pressure pack can.
_________________ |
|||
| Top | |
|||
| hans hartman |
|
||
|
as he said a little wd 40\penetrene and use a soft hammer \wood and and tap between the studs,this jarrs the disc-loosens the rust and it will start to spring off,until you can hand move it,then clean the rust off both,adjusting the brake-use verniers to measure the drum and set the brake dia.you have to jack both sides to turn the wheels.you will find plenty of brake dust and the shoes may be glazed-need to be roughed up with sand paper---cloth backed is best,flexible,as used in machine shops or sanders\linishers.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| DaveXR8 |
|
||
|
sweet. thanks.
I will get some WD40 on it and give it a crack. where can i get these veriners from and are they expensive?
_________________ AU3 XR8 Manual, Full options,Pursuit Lip, Boss bonnet, Hurricane extractors, zorst, SS Induction, K&N filter, Flash tuned...191rwkw |
||
| Top | |
||
| Froudey |
|
||
|
WD40 and a slight firm but gently tap should loosen it
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Rick's EF Fairmont Wagon |
|
||
|
wind in the hand-brake shoes.
It will then slide right off. when re-fitting you will need to wind them out till it almost binds, then back a fraction till it spins freely.
_________________ BF3 Egas XT Wagon |
||
| Top | |
||
| Andrew J |
|
|||
|
Dont the rears have a retaining screw to hold them to the axle?
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| hans hartman |
|
||
|
DaveXR8 wrote: sweet. thanks. any tool place should have them,not sure on price but not to dear,the ef is 189.something mm,i just use the 300mm set.
I will get some WD40 on it and give it a crack. where can i get these veriners from and are they expensive?
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| hans hartman |
|
||
|
Andrew J wrote: Dont the rears have a retaining screw to hold them to the axle? and rust on the spigot and disc,the shoes are close to the disc so you cant get much of a wiggle,it has to come off square with the rust.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 94 guests |
)
