|
| FORDom |
|
||
|
Hey guys, just wondering if these diff gears will fit in my factory 3.45 lsd?
http://cgi.ebay.com.au/Commodore-Ford-4-11-Borg-Warner-Diff-Gears-V8_W0QQitemZ230290868134QQihZ013QQcategoryZ33728QQssPageNameZWDVWQQrdZ1QQcmdZViewItem If i was to fit these, would it still be lsd? also, does anyone know a rough price on labour to fit these? and would there be a real advantage of 4.11 over 3.89's? or should i just go 3.89's because i imagine the 4.11's will be revving high on the highway (its already reving high with 3.45's compared to my old el futura ) thanks |
||
| Top | |
||
| Freak6 |
|
|||
|
thats just the gear there champ so you could re use your lsd or get a lokka.
_________________ Ford Motor Company
|
|||
| Top | |
|||
| eboost |
|
|||
|
nah, gears wont fit your later model diff mate.
|
|||
| Top | |
|||
| mitchg911 |
|
|||
|
um yes they will. they wont fit in a 3.08 or smaller housing..
you'll need an assortment of shims and a colapsable spacer to set the pinion height and backlash correctly. if it doesnt get setup right it will whine and break the teeth off the gears. and yes your only changing the gears so you will retain the lsd centre. -mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| Grimketel |
|
|||
|
yes they will fit in a 3.08 housing. the 3.89's from an r31 fit my au housing that was 3.08. easy as pie. the pinion head on the 3.08 is a lot bigger than the 3.89, dont know why you say it wont fit, load of BS. make sure you get the right bearings though. shaft is roughly the same from 75-78 series, and the correct pinion bearing takes up any slack.
"Also suits ford XA through to AU, ALL MODELS " has written on the add.
_________________ enough isn't enough |
|||
| Top | |
|||
| green machine |
|
|||
|
mate get the 3.89 from a r31 i payed $80 for mine.
i wouldn't go 4.11's as mine revv's it's head off now on the high way. and for labour go down and see joe from cms he did mine.
_________________ custom airbox,custom intake |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 0 guests |
