|
| cboz |
|
|||
|
Hey modders, just wondering how epic the job is of replacing my EF's 4 litre with an AU 200kw v8. Is it a fairly strait forward caper? Anyone here done and is there any good realiable types in Vic u can trust to do a drive in drive out style conversion? If it's not too hardcore i'm guessing it won't cost an an arm and a leg in labour costs. Does the AU 5 speed fit? Sorry for throwing a heap of sh!t at u guys, but any help that can be provided would be nice.
Camma~ |
|||
| Top | |
|||
| blacksabbath189 |
|
|||
|
You will require a V8 engine loom + ECU, K - frame..
The 6cyl T5 box won't bolt straight up, afew people have changed the input shaft and bellhousing so they can be fitted, but with a 220kw windsor behind it, the torque may be abit much for it.. You'd be better off finding a complete car, so you can swap all the components over! Hope that helps slightly mate.
_________________ Slavery, gets s**t done! |
|||
| Top | |
|||
| mitchg911 |
|
|||
|
the au 5spd wont fit from the v8 either as the extension housing is longer. it will put the shifter to far back..
-mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| xhxrsix |
|
|||
|
heaps easier with a whole car, i put the running gear from a el2 xr8 into my ef 4l.
also you wont need the kframe on ef-el. 6cyl and v8 kframes are the same 
_________________ EF V8T 11.54 @118mph |
|||
| Top | |
|||
| cboz |
|
|||
|
Hey thanks for the replies gents, sounds like a full wrecked v8 Falcon is the go so all is there for a convesrion...might be easier to sell my car and get an 8 maybe..Reckon this could be a pretty straight forward conversion for a mechanical workshop, thus keeping huge labour costs down if I provided say a wrecked Ef/L XR8?
|
|||
| Top | |
|||
| falconboy |
|
||
|
Mate, its a buyers market out there, and there seem to be tonnes of V8 Fairmonts and Fairlanes that you could pick up for a song. Some of them have seen better days, but if you aren't in a hurry, keep looking and you will find.
|
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
{USERNAME} wrote: might be easier to sell my car and get an 8 maybe..?
yes!! if you cant do most of the work yourself, then it will be cheaper as well |
||
| Top | |
||
| Burns |
|
|||
Age: 35 Posts: 540 Joined: 9th Aug 2007 Ride: FG Ute, ED XR8 Sprint, GPZ900R Location: Leopold, Geelong |
I'd just buy another car. I was going to do the same thing as you when i had my old ef fairmont but sold it and bought an el fairmont V8 with manunal conversion. No stress, no hassles, and it was 2k changeover, and i got a newer car with less kms and a few mods. If you can get the parts cheap and fit them yourself it still may be worth doing
_________________ The Past: EF Fairmont, EL Fairmont 5.0, HR Special, NF Fairlane 5.0, GSX 250-F, BA II XR8, VS3 Ute, VS2 L67 Calais |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
