|
| DJ_Brown |
|
|||
Age: 37 Posts: 290 Joined: 10th May 2006 Ride: 5 Spd EA Wagon, 5 spd EF Fairmon Location: Melbourne |
Hello
I was just comparing the pinout info on the EA-ED EEC4, and the EEC5 EL ECU.. The EEC4 says that pin 26 is 5 volt out for sensor reference, where as the EEC5 says pin 26 is not used.. Does the EEC5 have a 5 volt out for sensor reference?? cheers David
_________________ If you're not driving a manual, you are only steering... |
|||
| Top | |
|||
| justfordima |
|
|||
|
Well spotted. They both have pin 26 as 5V reference. Otherwise your map sensor, TPS, and a whole bunch of other stuff would just be out of whack. Pin 26 goes straight to the 5V regulator, which comes off the 12V ignition pin (internall) IIRC.
Cheers
_________________ ;++JustForDimSim++;
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 12 guests |
