|
| jonathon |
|
|||
|
hi there i am playing with the idea of painting the mirror backs on the falcon is there any advise that people can give.
is it easyer to do on the car of tack the mirror backs off, if so how do they come off? thanks
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| EFFII |
|
||
|
take them off so it saves you money and time on tape and the risk of overspray on the car i dunno how to take them off
|
||
| Top | |
||
| Shortshift |
|
|||
|
I've dismantled manual & electric mirrors. They're a pain to pull apart and reassemble (especially reattaching the spring). It's far easier to paint them on the car. Are you using a spray gun or pressure pack?
Masking tape and drop sheets don't cost much. You can get a cheap drop sheet for about $2 from Bunnings.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| jonathon |
|
|||
|
i will be using presure pack
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| EFFII |
|
||
|
Thats true but you have to mask up 100% or else you will stuff up the job so be extremely careful if you havnt masked up before. Get your self some 2mm tape for all the edges (rubber bits around the mirror eg weather strip) and then get some 2 inch tape overlapping the 2mm tape and then get newspaper and overlap that 2 inch so the door windscreen etc dosnt get any overspray what so ever and a drop sheet for the rest of the car.
|
||
| Top | |
||
| sexyr6 |
|
|||
|
why can't you just remove the mirror form the car, then you only need to mask off what you dont want painted. and do it away from the car to make sure there is no overspray..
_________________
|
|||
| Top | |
|||
| NAfairlane... |
|
|||
|
Yeah i did mirror's on my Fairlane's and my mates Calais, is easier to just remove the whole mirror and mask what you need. I also did all around the window trims etc and it improved the car 100%, grey makes the car look very old and ordinary.
sexyr6 has it right.
_________________ Mercedes 500SEC: -- GONE -- http://www.fordmods.com/the-garage-f53/my-83-mercedes-500sec-buildup-t69837.html |
|||
| Top | |
|||
| jonathon |
|
|||
|
thanks for the replys
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
i've noticed on a lot of ea-ed mirrors there is a phillips head screw that holds the cover on , located on the underside of the mirror. 15 seconds per side to remove then the cover slips off. aftermarket mirrors the cover clips on,a little harder to remove.
|
|||
| Top | |
|||
| jonathon |
|
|||
|
xf ea mirrors have the screw but eb ed mirrors dont
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 85 guests |
