|
| timmay_73 |
|
|||
|
As the title says, and I just have a few queries...
1. Theres a slight dent near where the cat bolts on... Will this make any noticable difference, flat spots or the like? (pics below) and; 2. The tip is looking awfully dull, any ideas on how to clean/polish it up? I noticed Fordfreak did an awesome job on that quad exhaust he picked up, but can't seem to find the thread anymore... And it won't let me see the 2nd page of his posts 
Anyways heres some pics, any advice would be awesome 
Thanks 
|
|||
| Top | |
|||
| nannas_ed |
|
|||
|
get some autosol and elbow grease onto that tip and it will come up a million bucks
and dont worry about the dent in the extractors, it looks tiny as so i doubt that you will notice anything at all
_________________
|
|||
| Top | |
|||
| lil_lincoln |
|
|||
|
gday mate the dent shouldnt really make and diff in flow. as for the tip brasso metal polish or autosol metal polish and alot of elbow grease (Y) will come up like new, when fitting make sure u use all new gaskets!!!!! lol i thought id do the dodgy and get away with using old ones buttt no workie. they look like pacies, you will find a huge diff from stock to these as i have
 alot more throttle response and pulls harder i believe
_________________ |
|||
| Top | |
|||
| PIMP_LTD |
|
||
|
The dint will be fine man, Won't make a difference.
As for bringing up the tip, i'd try this metal polish sponge s**t that comes in the little yellow can, i can't remember what its called, but it works a treat on stuff like that. Andrew.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| Ballast |
|
|||
|
PIMP_LTD wrote: The dint will be fine man, Won't make a difference.
As for bringing up the tip, i'd try this metal polish sponge s**t that comes in the little yellow can, i can't remember what its called, but it works a treat on stuff like that. Andrew. brite shine. That's the s**t 
_________________ Remember kids, the more pages of crap in your build thread, the bigger your e-penis is |
|||
| Top | |
|||
| Grimketel |
|
|||
|
rinse off excess dust and dirt then hit it with a few hundered mills of coke (tip must be cold). rinse a kitchen sponge in coke and use the green side first. rinse and repeat with more coke and use the sponge side to detail.
coke is great for cleaning grime off polished metal. 2 bucks.
_________________ enough isn't enough |
|||
| Top | |
|||
| PIMP_LTD |
|
||
|
a_total_tool wrote: brite shine. That's the s**t Ah yes thats the name of it! Thanks dude, i need some myself
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| timmay_73 |
|
|||
|
Aaaah awesome, good to hear.
Thanks all!
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 67 guests |
